Datasheet4U Logo Datasheet4U.com

ISL71026M - 3.3V CAN Transceiver

Description

The ISL71026M is a radiation tolerant 3.3V CAN transceiver that is compatible with the ISO11898-2 standard for applications calling for Controller Area Network (CAN) serial communication in satellites and aerospace communications and telemetry data processing in harsh industrial environments.

Features

  • Qualified to Renesas Rad Tolerant Screening and QCI Flow (R34TB0004EU).
  • ESD protection on all pins: 5kV HBM.
  • Compatible with ISO11898-2.
  • Operating supply range: 3.0V to 3.6V.
  • Bus pin fault protection to ±20V.
  • Three selectable driver rise and fall times.
  • High data rates up to 5Mbps.
  • -7V to +12V common mode input voltage range.
  • Hi Z input allows for 120 nodes on the bus.
  • Cold spare: powered down devices/nodes will not affect active devices operati.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ISL71090SEHF25 Radiation Hardened Ultra Low Noise / Precision Voltage Reference Intersil Corporation
ISL7119RH Radiation Hardened High Speed Dual Voltage Comparator Intersil Corporation
ISL7124SRH Quad Operational Amplifiers Intersil Corporation
ISL70001SRH Radiation Hardened and SEE Hardened 6A Synchronous Buck Regulator Intersil Corporation
ISL72026SEH 3.3V Radiation Tolerant CAN Transceiver Intersil Corporation

Other Datasheets by Intersil (Renesas)

Part Number Description
ISL71001M 6A Synchronous Buck Regulator
ISL71010B25 2.5V Precision Voltage Reference
ISL71010B50 5V Precision Voltage Reference
ISL71030M Radiation Tolerant 5V 16-Channel Analog Multiplexer
ISL71040M Radiation Tolerant Low-Side GaN FET Driver

Full PDF Text Transcription

Click to expand full text
ISL71026M 3.3V CAN Transceiver, 1Mbps, Listen Mode, Loopback Datasheet Description The ISL71026M is a radiation tolerant 3.3V CAN transceiver that is compatible with the ISO11898-2 standard for applications calling for Controller Area Network (CAN) serial communication in satellites and aerospace communications and telemetry data processing in harsh industrial environments. The transceiver can transmit and receive at bus speeds up to 5Mbps. It can drive a 40m cable at 1Mbps per the ISO11898-2 specification. The device is designed to operate across a common-mode range of -7V to +12V with a maximum of 120 nodes. The device has three discrete selectable driver rise/fall time options, a listen mode feature, and loopback test capability.
Published: |