Datasheet4U Logo Datasheet4U.com

AN9827.2 - Manual

This page provides the datasheet information for the AN9827.2, a member of the AN9827-2 Manual family.

Datasheet Summary

Description

The HI5728EVAL1 evaluation board provides a quick and easy method for evaluating the HI5728, 125MSPS Dual High Speed DAC.

Each converter outputs a current into a load resistor to form a voltage which can be measured by using the included SMA connectors.

Features

  • HI5728, 125MSPS CMOS DAC.
  • Simple and Easy to Use.
  • Standard VME/DSP Interface, HSP-EVAL Compatible.
  • SMA Outputs with Transformer Option.
  • Easily Selectable Internal or External Reference.

📥 Download Datasheet

Datasheet preview – AN9827.2

Datasheet Details

Part number AN9827.2
Manufacturer Intersil
File Size 528.78 KB
Description Manual
Datasheet download datasheet AN9827.2 Datasheet
Additional preview pages of the AN9827.2 datasheet.

📁 Similar Datasheet

  • AN9820.1 - A Condensed Review of Spread Spectrum Techniques for ISM Band Systems (Intersil Corporation)
  • AN9829 - PRISM Brief Tutorial on IEEE 802.11 Wireless LANs (Intersil Corporation)
  • AN980 - VHF Narrowband FM Receiver Design Using the MC3362 & MC3363 Dual Conversion Receivers (Motorola)
  • AN983 - PCI/miniPCI-to-Ethernet LAN Controller (ETC)
  • AN983B - PCI/miniPCI-to-Ethernet LAN Controller (ETC)
  • AN98580 - Migration (Cypress Semiconductor)
  • AN985B - CARDBUS-TO-ETHERNET LAN CONTROLLER (ETC)
  • AN904 - MAGNETIC AMPLIFIER (STMicroelectronics)
  • AN908 - APPLICATION NOTE (ST Microelectronics)
  • AN90B00 - Transistor Arrays (Panasonic Semiconductor)
Other Datasheets by Intersil
  • AN9515 - Multiplier Improcers the Dynamic Range of Echo Systems
  • AN9614 - Using PRISM-Chip

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com HI5728EVAL1 User’s Manual TM Application Note February 2000 AN9827.2 Description The HI5728EVAL1 evaluation board provides a quick and easy method for evaluating the HI5728, 125MSPS Dual High Speed DAC. Each converter outputs a current into a load resistor to form a voltage which can be measured by using the included SMA connectors. The amount of current out of the DAC is determined by an external resistor and either an internal or external reference voltage. The evaluation board also includes a VME digital interface that is compatible with the HSP-EVAL board, so DDS (Direct Digital Synthesis) can be performed with minimal setup time. A transformer is included to take advantage of differential signal drive.
Published: |