PVO402 Datasheet | International Rectifier

Description The PVO402P Photovoltaic Relay is a dual-pole, normally open solid-state relay plus ring detector. By integrating these two functions in one package it can replace two discrete ponents, i.e., a relay and an AC-input opto-coupler. The relay portion of PVO402P utilizes International Rectifier’s HEXFET power MOSFET as the output switch, driven by an integrated circuit photovoltaic generator of novel construction. The output switch is controlled by radiation from a Ga Al As light emitting diode (LED) which is optically isolated from the photovoltaic generator. The ring detector portion of PVO402P has two LEDs in inverse parallel connection as the input sensing element and a silicon NPN photo-transistor as the output switch. PVO402P is ideally suited for PCMCIA fax/modem cards. Its extremely low profile allows it to be used in Type II cards whose outer shells are only 5mm thick. PVO402P Relays are packaged in an 8-pin, molded ‘Thin-Pak’ DIP package with ‘gull-wing’ surface mount terminals. It is available in plastic shipping tubes or on tape-and-reel. Please refer to Part Identification (opposite) for details. PVO402P ‘Thin-Pak’ Applications On/Off Hook switch Dial pulsing Ringer injection Ring detection Loop current detection s s s s s PVO402P Features HEXFET Power MOSFET output Bounce-free operation 3,750 VRMS I/O isolation Linear AC/DC operation Solid-State reliability UL recognized s s s s s s Part Identification PVO402P PVO402P-T SMT, plastic shipping tube SMT, T&R (HEXFET is the registered trademark for International Rectifier Power MOSFETs) To Order Previous Datasheet Index Next Data Sheet PVO402P Electrical Specifications (-40°C ≤ TA ≤ +85°C unless otherwise specified) RELAY INPUT CHARACTERISTICS Min. Control Current (See Fig.1) Max. Control Current for Off-State Resistance @TA=+25° C Control Current Range (Caution: current limit input LED, see Fig.6) Max. Reverse Voltage Limits 3.0 0.4 3.0 to 25 7.0 Units m A m A m A V OUTPUT CHARACTERISTICS...