AUIPS7081 Datasheet | International Rectifier

Features - - - - - - - - Over temperature shutdown (with auto-restart) Short circuit protection (current limit) Active clamp Open load detection Logic ground isolated from power ground ESD protection Ground loss protection Status feedback Product Summary Rds(on) Vclamp I Limit Open load Package 70m max. 70V 5A (typ.) 3V Description The AUIPS7081(R)(S) is a five terminal Intelligent Power Switch (IPS) with built in short circuit, over-temperature, ESD protection, inductive load capability and diagnostic feedback. The output current is limited at Ilim value. Current limitation is activated until the thermal protection acts. The over-temperature protection turns off the device if the junction temperature exceeds Tshutdown. It will automatically restart after the junction has cooled 7°C below Tshutdown. A diagnostic pin is provided for status feedback of short circuit, over-temperature and open load detection. The double level shifter circuitry allows large offsets between the logic ground and the load. TO220 D²Pak AUIPS7081S D-Pak AUIPS7081R Typical Connection +5V +Bat Vcc(3) Dg(4) Control Rdg In(2) V Diag Rin Input Signal Load Gnd(1) Out(5) Pull-up resistor for Open Load Off detection 15K .irf. AUIPS7081(R)(S) Qualification Information† Qualification Level Automotive (per AEC-Q100) ments: This family of ICs has passed an Automotive qualification. IR’s Industrial and Consumer qualification level is granted by extension of the higher Automotive level. MSL1, 260°C D2PAK-5L (per IPC/JEDEC J-STD-020) TO-220 DPAK-5L Not applicable (non-surface mount package style) Moisture Sensitivity Level MSL1, 260°C (per IPC/JEDEC J-STD-020) Class M2 (+/-200V) Machine Model (per AEC-Q100-003) Class H2 (+/-4000V) ESD Human Body Model (per AEC-Q100-002) Class C4 (+/-1000V) Charged Device Model (per AEC-Q100-011) Class II, Level A IC Latch-Up Test (per AEC-Q100-004) Ro HS pliant Yes † Qualification standards can be found at International Rectifier’s web site...