Datasheet4U Logo Datasheet4U.com

IXF18102 - 10Gbps Physical Layer Device

Description

The Intel® IXF18102 is a highly integrated framer solution for STS-192c/STM 64c port applications.

The IXF18102 supports various modes of operation for transport of HDLC frames (POS) or Generic Framing Procedure (GFP) packet formatting.

Features

  • Features s Benefits s Two modes of operation: STS-192c/STM 64c POS STS-192c/STM 64c GFP SFI-4 Device is optimized to support POS and GFP at STS-192c/STM 64c s s SFI-4 is widely deployed as the interface for OC-192c/SDH 64c optics modules s SPI-4 Phase 2 s s s Helps minimize pin count and allows interface architecture to be scaled beyond 10Gbps LVDS I/O, which has improved signal integrity versus HSTL implementations It is independent of the type of data protocol being transferred s.

📥 Download Datasheet

Datasheet Details

Part number IXF18102
Manufacturer Intel Corporation
File Size 136.89 KB
Description 10Gbps Physical Layer Device
Datasheet download datasheet IXF18102 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
IXFA102N15T Power MOSFET IXYS Corporation
IXFA102N15T N-Channel MOSFET INCHANGE
IXFA10N60P Polar MOSFET IXYS Corporation
IXFA10N80P Power MOSFET IXYS Corporation
IXFA110N15T2 Power MOSFET IXYS Corporation

Other Datasheets by Intel Corporation

Part Number Description
IXF18104 10 Gigabit Lan PHY

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
product brief Intel IXF18102 ® 10Gbps Physical Layer Device for STS-192c/STM 64c POS/GFP www.datasheet4u.com Product Description The Intel® IXF18102 is a highly integrated framer solution for STS-192c/STM 64c port applications. The IXF18102 supports various modes of operation for transport of HDLC frames (POS) or Generic Framing Procedure (GFP) packet formatting. Internal mapping engines provide the required formatting and packet data maintenance into the STS-192c/STM 64c SONET/SDH frame payload. A data-over-Fiber packet mapping mode is supported for test equipment and test functionality verification within a system. The GFP mapping engine can be connected directly to Forward Error Correction (FEC) or OTN digital wrapper devices for GFP, per G.709 specifications.