Datasheet4U Logo Datasheet4U.com

SLE4428 - ICs for Chip Cards / Intelligent 8-Kbit EEPROM

Description

are fulfilled.

Further information is confidential and on request.

Features

  • q q q q q q q q q 1024 x 8 bit EEPROM organization Byte-wise addressing Irreversible byte-wise write protection 1024 x 1 bit protection memory organization Serial three-wire bus End of programming indicated on data output Minimum of 104 write/erase cycles Data retention for minimum of ten years Contact configuration and serial interface in accordance to ISO standard 7816 (synchronous transmission) M2.2 Additional Feature of SLE 4428 q Data can only be changed after entry of the correct 2-byt.

📥 Download Datasheet

Datasheet preview – SLE4428

Datasheet Details

Part number SLE4428
Manufacturer Infineon
File Size 382.63 KB
Description ICs for Chip Cards / Intelligent 8-Kbit EEPROM
Datasheet download datasheet SLE4428 Datasheet
Additional preview pages of the SLE4428 datasheet.

📁 Similar Datasheet

  • SLE4428 - (SLE4418 / SLE4428) ICs for Chip Cards (Siemens Semiconductor Group)
  • SLE4406S - Security & Chip Card ICs (Infineon Technologies AG)
  • SLE4406SE - Security & Chip Card ICs (Infineon Technologies AG)
  • SLE4406SP - Intelligent 112-Bit EEPROM Counter (Infineon)
  • SLE4406SPE - Intelligent 112-Bit EEPROM Counter (Infineon)
  • SLE4418 - (SLE4418 / SLE4428) ICs for Chip Cards (Siemens Semiconductor Group)
  • SLE4432 - (SLE4432 / SLE4442) 256 Byte EEPROM (Siemens)
  • SLE4432 - (SLE44xx) ICs for Chip Cards (Siemens Semiconductor Group)
  • SLE4436 - Security & Chip Card ICs (Infineon Technologies AG)
  • SLE4436E - Security & Chip Card ICs (Infineon Technologies AG)
Other Datasheets by Infineon Technologies

Full PDF Text Transcription

Click to expand full text
ICs for Chip Cards SLE 4418 / SLE 4428 Intelligent 8-Kbi t EEPROM Data Sheet 04.94 Published by Semiconductor Group Siemens Aktiengesellschaft Ordering No. B116-H6447-G1-X-7600 Printed in Germany DA 04942. SLE 4418/SLE 4428 Revision History: Previous Releases: Page 04.94 09.92 Subjects (changes since last revision) Update Data Classification Maximum Ratings Maximum ratings are absolute ratings; exceeding only one of these values may cause irreversible damage to the integrated circuit. Characteristics The listed characteristics are ensured over the operating range of the integrated circuit. Typical characteristics specify mean values expected over the production spread. If not otherwise specified, typical characteristics apply at T A = 25 °C and the given supply voltage.
Published: |