IRMT6100 Datasheet | Infineon

DESCRIPTION IRMS6100/IRMT6100 is an Ir DA pliant 1.152 Mb/s infrared data transceiver. Its external Shut Down (SD) feature cuts current consumption to typically less than 0.01 µA. The Shut Down (SD) mode disables the transmit input and tri-states the receiver output with a 500 kΩ pull up. The transmit input is AC coupled, limiting transmit pulse duration to 70 µs, preventing transmitter damage and continuous LED output which also provides protection for eye safety. Selectable LED transmit power (Pin 7) makes it easy for designers to use standard power mode (Pin 7=H) for 1 meter link or low power mode (Pin7=L) for 20 cm link. Absolute Maximum Ratings, TA=25°C (except where noted) Supply Voltage Range, all states, VCC - 0.5 to +7.0 V LED Anode Voltage, VCC=0 to 5.5 V, not transmitting, VLEDA - 0.5 to +9.0 V LED Anode Voltage, VCC=2.7 to 5.5 V, transmitting, VLEDA - 0.5 to VCC +4.0 V Input Current, ICC during transmit, VCC=5.0 V, Tx D=VCC (peak) 20 m A Output Rx D Current 50 m A Storage Temperature, storage or reduced performance, TS - 40 to +100°C Ambient Temperature, operating, TA - 25 to 85°C Lead Solder Temperature, 230°C <10 s IC Junction Temperature, TJ 125°C Average IR LED Current, LED Anode=3.3 V, ILED 100 m A Repetitive Pulsed IR LED Current, <10 µs, ton <20%, LED Anode=3.3 V, ILED(RP) 600 m A Input Voltage: Tx D, SD - 0.5 to VCC+0.5 V Rx D Voltage - 0.5 to VCC +0.5 V Table 1. Pin Functions Pin no. 1 2 3 4 Function IR LEDA IR LEDC Tx D Rx D Pin no. 5 6 7 8 Function...