Datasheet4U Logo Datasheet4U.com

XDP700-002 - Hot-swap Controller

Description

XDP700 is a wide input voltage Hot Swap and System monitoring Controller IC that drives a single or multiple parallel N-Channel MOSFETs.

In addition to a controlled turn ON, XDP700 provides continuous system health monitoring and communication to the main MCU via PMBus interface.

Features

  • Compatible with Infineon’s OptiMOSTM.
  • Compatible with Infineon’s Linear FET.
  • Wide input voltage range: -6.5 V to -80 V.
  • Transient withstand: up to -100 V for 500 ms.
  • Dedicated current and voltage ADCs: 12-bit.
  • Programmable and pre-set FET active SOA protection.
  • Integrated gate driver for external N-Channel MOSFET.
  • Configurable fast FET's shut down: two step turn-off or 1.5 A pull-down current.
  • PMBus interface: 1 MH.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
XDPAD5100 Dual Pico Amp Diodes Calogic LLC

Other Datasheets by Infineon

Part Number Description
XDP710 Hot-swap Controller
XDP710-002 Hot-swap Controller
XDPE12254C Digital Multi-phase Controller
XDPE12284C Digital Multi-phase Controller
XDPE15284D Digital Multi-phase Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
XDP700-002 Hot-swap Controller Wide input voltage range (-6.5 V to -80 V) system monitoring and protection IC Features • Compatible with Infineon’s OptiMOSTM • Compatible with Infineon’s Linear FET • Wide input voltage range: -6.5 V to -80 V • Transient withstand: up to -100 V for 500 ms • Dedicated current and voltage ADCs: 12-bit • Programmable and pre-set FET active SOA protection • Integrated gate driver for external N-Channel MOSFET • Configurable fast FET's shut down: two step turn-off or 1.5 A pull-down current • PMBus interface: 1 MHz • Precision input and output voltage monitoring and reporting: ≤ 0.5% • Precision FET's current monitoring and reporting: ≤ 1.3% at full ADC range • Precision input power monitoring and reporting: ≤ 1.