Datasheet4U Logo Datasheet4U.com

TLE4922-XIN-F - Cell Hall sensor suited to detect motion

Description

The TLE4922 is an active mono cell Hall sensor suited to detect motion and position of ferromagnetic and permanent magnet structures.

An additional self-calibration module has been implemented to achieve optimum accuracy during normal running operation.

Features

  • Twist independent mounting (TIM) “enables one sensor fits all”.
  • Small thin package (PG-SSO-4-1).
  • Protected against harsh environment due to.
  • Short-circuit current protection at the output.
  • Over temperature shutdown at the output and.
  • Reverse voltage protection.
  • Supreme performance due to adaptive symmetrical hysteresis / threshold.
  • Independent of back bias magnet polarity due to ±400mT full scale range.
  • Enhanced EM.

📥 Download Datasheet

Datasheet Details

Part number TLE4922-XIN-F
Manufacturer Infineon
File Size 718.11 KB
Description Cell Hall sensor suited to detect motion
Datasheet download datasheet TLE4922-XIN-F Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TLE4923 Dynamic Differential Hall Effect Sensor IC Siemens Semiconductor Group
TLE4923 Dynamic Differential Hall Effect Sensor IC Infineon Technologies AG
TLE4925 Differential Hall Sensor Infineon Technologies AG
TLE4905 Uni- and Bipolar Hall IC Switches Siemens Semiconductor Group
TLE4905 Uni- and Bipolar Hall IC Switches Siemens Semiconductor Group

Other Datasheets by Infineon

Part Number Description
TLE4922-XAN-F Cell Hall sensor suited to detect motion
TLE4921-3U Dynamic Differential Hall Effect Sensor IC
TLE4921-5U Dynamic Differential Hall Effect Sensor IC Detection
TLE4927C Dynamic Differential Hall Effect Sensor
TLE4906H High Precision Hall-Effect Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TLE4922-XIN-F 1 Product Description The TLE4922 is an active mono cell Hall sensor suited to detect motion and position of ferromagnetic and permanent magnet structures. An additional self-calibration module has been implemented to achieve optimum accuracy during normal running operation. 1.1 Target Application The TLE4922 is a speed sensor especially optimized for small engine (2and 3 wheeler) applications. • Crankshaft speed and position sensing • Transmission speed on output shaft • Speedometer application Excellent sensitivity and accuracy combined with its wide operational temperature range makes the sensor ideally suited for harsh environments. 1.
Published: |