900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Infineon Technologies Electronic Components Datasheet

BTS50010-1TAD Datasheet

Smart High-Side Power Switch

No Preview Available !

BTS50010-1TAD
Smart High-Side Power Switch
1 Overview
Features
• One channel device
• Low Stand-by current
• 3.3 V to VS level capable input pin
• Electrostatic discharge protection (ESD)
• Optimized Electromagnetic Compatibility (EMC)
• Logic ground independent from load ground
• Very low leakage current at OUT pin
• Compatible to cranking pulse requirement (test pulse 4 of ISO 7637 and cold start pulse in LV124)
• Embedded diagnostic functions
• Embedded protection functions
• Green Product (RoHS compliant)
• AEC Qualified
Applications
• Suitable for resistive, inductive and capacitive loads
• Replaces electromechanical relays, fuses and discrete circuits
• Most suitable for applications with high current loads, such as heating system, main switch for power
distribution, start-stop power supply switch
• PWM applications with low frequencies
Description
The BTS50010-1TAD is a 1.0 msingle channel Smart High-Side Power Switch, embedded in a PG-TO-263-7-
10 package, providing protective functions and diagnosis. It contains Infineon® ReverSave™ functionality. The
power transistor is built by a N-channel power MOSFET with charge pump. It is specially designed to drive high
current loads up to 80 A, for applications like switched battery couplings, power distribution switches,
heaters, glow plugs, in the harsh automotive environment.
Data Sheet
www.infineon.com/power
1
Rev. 1.1
2017-03-30


Infineon Technologies Electronic Components Datasheet

BTS50010-1TAD Datasheet

Smart High-Side Power Switch

No Preview Available !

BTS50010-1TAD
Smart High-Side Power Switch
Overview
Table 1 Product Summary
Parameter
Symbol Values
Operating voltage range
VS(OP)
Extended supply voltage including dynamic undervoltage capability
VS(DYN)
Maximum ON-state resistance (TJ = 150°C)
RDS(ON)
Minimum nominal load current (TA = 85°C)
IL(NOM)
Typical current sense differential ratio
dkILIS
Minimum short circuit current threshold
ICL(0)
Maximum stand-by current for the whole device with load (TA = TJ = 85°C) IVS (OFF)
Maximum reverse battery voltage (TA = 25°C for 2 min)
-VS(REV)
8 V … 18 V
3.2 V … 28 V
2 m
40 A
52100
150 A
18 µA
16 V
Embedded Diagnostic Functions
• Proportional load current sense
• Short circuit / Overtemperature detection
• Latched status signal after short circuit or overtemperature detection
Embedded Protection Functions
• Infineon® ReverSave™: Reverse battery protection by self turn ON of power MOSFET
• Infineon® Inversave: Inverse operation robustness capability
• Secure load turn-OFF while device loss of GND connection
• Overtemperature protection with latch
• Short circuit protection with latch
• Overvoltage protection with external components
• Enhanced short circuit operation
• Infineon® SMART CLAMPING
Type
BTS50010-1TAD
Package
PG-TO-263-7-10
Marking
S50010D
Data Sheet
2
Rev. 1.1
2017-03-30


Part Number BTS50010-1TAD
Description Smart High-Side Power Switch
Maker Infineon
PDF Download

BTS50010-1TAD Datasheet PDF






Similar Datasheet

1 BTS50010-1TAD Smart High-Side Power Switch
Infineon





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy