AMC-100 Overview
The Indelac AMC-100/AMC-101 AC Motor Controllers are used for proportional positioning of split phase AC actuator motors. An external mand signal of 0-10V, 1-5V, or 4-20mA can be used to pare to a feedback signal from a potentiometer. The open or closed AC output will energize, which powers the actuator motor, until the feedback signal matches the mand signal, at which time the controller's AC output is turned off...
AMC-100 Key Features
- Multiple units are easily connected in parallel to a mon mand signal
- Built-in utility power supplies for powering a mand pot, 4-20mA input or output transmitter, and the feedback potentiome
- No external motor resistors are required