IS31FL3189 Datasheet | ISSI

DESCRIPTION The IS31FL3189 is an LED driver with an audio synchronization mode that virtually eliminates the need of real time software processing for LED lighting effects. The OUT0~9 can be operated at 4 basic modes: Audio synchronization mode, top-down scan mode, constant current mode, bination of audio synchronization and top-down scan mode. Each of the OUT0~2, OUT7~9 is a constant current sink pulse width modulated in 256 steps, featuring One Shot Programming mode and Interface Intensity Control mode for RGB lighting effects. The output current is user selectable to be one of 5 levels, 17.5m A, 28.9m A, 38.9m A, 46.7m A or 66.5m A (typical). At 38.9m A the IS31FL3189 outputs require only 0.4V of headroom voltage. In One Shot Programming mode, the timing characteristics for output current - current ramping up, holding, ramping down and off time, can be adjusted individually so that each output can independently maintain a pre-established pattern without requiring any additional interface activity, thus saving valuable system resources. In Interface Intensity Control mode, the PWM duty cycle of each output can be independently programmed and controlled in 256 steps to simplify color mixing. APPLICATIONS - Cellular phones - MP3/MP4/CD/minidiskplayers - Digital picture frame/toys TYPICAL APPLICATION CIRCUIT FEATURES - - 10 outputs each with 38.9m A at 0.4V headroom. 2 independently controlled, 6 channels of 256 steps PWM RGB LED drivers with programmable brightness and blinking patterns for LED’s lighting effects Fully programmable operating modes: Audio synchronization mode Audio synchronization +Top-down scan mode Top-down scan mode Constant current mode One Shot Programming mode with Gamma correction Interface intensity control mode with 256 steps current level setting for RGB lighting effects RGB blink/not blink with audio mode Each outputs enable/disable individually Programmable parameter setting: Audio gain setting Top-down scan mode output current setting Top-down...