IS22EF08G
Key Features
- Packaged NAND flash memory with eMMC 5.1 interface - IS21/22EF08G: 8Gigabyte - IS21/22EF16G: 16Gigabyte - Compliant with eMMC Specification Ver.4.3, 4.4, 4.41,4.5,4.51, 5.0, 5.1
- Bus mode - High-speed eMMC protocol - Clock frequency: 0-200MHz. - Ten-wire bus (clock, 1-bit command, 8-bit data bus) and a hardware reset.
- Supports three different data bus widths: 1-bit(default), 4 bits, 8 bits - Data transfer rate: up to 52Mbyte/s (using 8 parallel data lines at 52 MHz) - Single data rate: up to 200Mbyte/s @ 200MHz (HS200) - Dual data rate: up to 400Mbyte/s @ 200MHz (HS400)
- Operating voltage range: - VCCQ = 1.8 V/3.3 V - VCC = 3.3 V
- Supports Enhanced Mode where the device can be configured as pseudo-SLC (pSLC) for higher read/write performance, endurance, and reliability.
- Error free memory access - Internal error correction code (ECC) to protect data communication - Internal enhanced data management algorithm - Solid protection from sudden power failure, safe-update operations for data content
- Security - Support secure bad block erase and trim commands - Enhanced write protection with permanent and partial protection options
- Major supported features - HS400, Field Firmware Update (FFU), Power Off Notification, Pre EOL information, Enhanced Device Life time, Optimal Size.
- Major supported eMMC 5.1 features - Enhanced Strobe, Cache Flushing Report, BKOPS Control, Cache Barrier, RPMB Throughput Improve, Secure Write Protection.
- CMD Queuing is not supported.
