IS21ES08G
Description
ISSI eMMC products follow the JEDEC eMMC 5.0 standard. It is ideal for embedded s.
Key Features
- Packaged NAND flash memory with eMMC 5.0 interface
- IS21/22ES08G: 8Gigabyte
- Compliant with eMMC Specification Ver.4.4, 4.41,4.5,5.0
- Bus mode - High-speed eMMC protocol - Clock frequency: 0-200MHz. - Ten-wire bus (clock, 1 bit command, 8 bit data bus) and a hardware reset.
- Supports three different data bus widths : 1 bit(default), 4 bits, 8 bits - Data transfer rate: up to 52Mbyte/s (using 8 parallel data lines at 52 MHz) - Single data rate : up to 200Mbyte/s @ 200MHz (HS200) - Dual data rate : up to 400Mbyte/s @ 200MHz (HS400)
- Operating voltage range : - VCCQ = 1.8 V/3.3 V - VCC = 3.3 V
- Supports Enhanced Mode where the device can be configured as pseudo-SLC (pSLC) for higher read/write performance, endurance, and reliability.
- Error free memory access - Internal error correction code (ECC) to protect data communication - Internal enhanced data management algorithm - Solid protection from sudden power failure, safe-update operations for data content
- Security - Support secure bad block erase and trim commands - Enhanced write protection with permanent and partial protection options
- Field Firmware Update(FFU)
