IK3301 - Triple DC to DC Converter Control IC

Datasheet Summary

Description

IK3301 is to be used as power supply control IC for the system that is based on CCD image sensor.

8V, with excellently controlled ripple voltage.

Features

Built-in 3-Channel Voltage Output Option : 15V / 5.0V / -8V, 12V / 3.3V / -8V.
PWM Method.
High Power Efficiency (80%).
Low Heat Dissipation.
9~18V Wide Operating Voltage.
Very Low Ripple Voltage Noise (less than 20mV).
High Driving Current (300mA@Vout 3.3V or 5.0V).
Small Package Size :16pin MLP (QFN).
Simple and Low Cost External Circuit.
Built-in Protection Circuit for External Damage.

IK Semicon

📥 Download Datasheet

Datasheet Details

Part number	IK3301
Manufacturer	IK Semicon
File Size	605.75 KB
Description	Triple DC to DC Converter Control IC
Datasheet	IK3301 Datasheet
Additional preview pages of the IK3301 datasheet.

📁 Similar Datasheet

IK31001 - Low Drop Regulator (IK Semiconductor)

Other Datasheets by IK Semicon

IK3051 - Constant Voltage and Constant Current Controller
IK3051A - Constant Voltage and Constant Current Controller
IK3101 - Low Drop Regulator
IK3401 - Green Mode PWM Controller

Full PDF Text Transcription

Click to expand full text

IK3301 Triple DC to DC Converter Control IC for CCD Image sensor DESCRIPTION IK3301 is to be used as power supply control IC for the system that is based on CCD image sensor. IK3301 supplies all the voltages that are needed to operate CCD image sensor, 15V, 5V and –8V, with excellently controlled ripple voltage. The typical power efficiency of this device is 80% at a standard load current. Due to the high power efficiency, the heat dissipation is suppressed, which can be fatal to the image quality of CCD sensor. Excellent voltage ripple and suppressed heat dissipation will be very beneficial for the CCD system that needs high image quality. www.DataSheet4U.com FEATURES • Built-in 3-Channel Voltage Output Option : 15V / 5.0V / -8V, 12V / 3.

Published: May 14, 2010 |