900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Integrated Device Technology Electronic Components Datasheet

F6101 Datasheet

Ku-Band SATCOM Receiver

No Preview Available !

Ku-Band SATCOM Receiver IC
10GHz to 14GHz
F6101 Advance
Short-Form Datasheet
Description
The F6101 is an 8-channel receiver silicon IC designed using a
SiGe BiCMOS process for Ku-Band SATCOM phased array
applications. The core IC has 6-bit phase control coupled with more
than 30dB gain control on each channel to achieve fine beam
steering and gain compensation between channels. The device
has 15.5dB nominal electric gain and -23dBm IP1dB. The core chip
achieves an RMS phase error of 2.5° and RMS gain error of 0.25dB
over the frequency of operation. The typical total power con-
sumption is 0.34W (43mW per channel).
Competitive Advantage
High integration
Orthogonality of phase and amplitude control
Advanced Serial Peripheral Interface (SPI) with 4-state
memory
Superior channel-to-channel isolation
Minimal footprint
Typical Applications
Ku-Band SATCOM
Aerospace and Maritime
Weather Radar
Beam Steering
Test and Measurement
Features
10GHz to 14GHz operation
8 radiation channels
6-bit phase control
20ns typical gain settling time
20ns typical phase settling time
2.5° typical RMS phase error
0.25dB typical RMS gain error
30dB gain attenuation range
5-bit IC address
Integrated proportional-to-absolute temperature (PTAT)
sensor with external biasing
-40°C to +95°C internal temperature sensor
Programmable 4-state on-chip memory
Supply voltage: +2.1V to +2.5V
-40°C to +95°C ambient operating temperature range
27°C typical ambient operating temperature
5mm x 5mm, 40-QFN package
Block Diagram
Figure 1. Block Diagram
RF1
RF2
RF3
RF4
RFC
RF8
RF7
RF6
RF5
© 2018 Integrated Device Technology, Inc.
1
September 27, 2018


Integrated Device Technology Electronic Components Datasheet

F6101 Datasheet

Ku-Band SATCOM Receiver

No Preview Available !

F6101 Advance Short-Form Datasheet
Ordering Information
Orderable Part Number
Package
MSL Rating
Carrier Type
Temperature
F6101NTGK
5mm x 5mm 40-QFN
MSL 3
Tray -40° to +95°C
F6101NTGK8
5mm x 5mm 40-QFN
MSL 3
Reel -40° to +95°C
F6101EVB
Evaluation Board
F6101EVS
F6101 Evaluation Kit System, including Evaluation Board, 2x THRU Reference Fixture, FT2232H Mini-Module
Microcontroller, Digital Cable, Power Cable, and USB-to-Mini Cable
Corporate Headquarters
6024 Silver Creek Valley Road
San Jose, CA 95138
www.IDT.com
Sales
1-800-345-7015 or 408-284-8200
Fax: 408-284-2775
www.IDT.com/go/sales
Tech Support
www.IDT.com/go/support
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its affiliated companies (herein referred to as “IDT”) reserve the ri ght to modify the products and/or specifications described herein at any time,
without notice, at IDT's sole discretion. Performance specifications and operating parameters of the described products are determined in an independent state and are not guaran teed to perform the same
way when installed in customer products. The information contained herein is provided without representati on or warranty of any kind, whether express or implied, including, but not limited to, the suitability
of IDT's products for any particular purpose, an implied warranty of merchantability, or non -infringement of the intellectual property rights of others. This document is presented only as a guide and does not
convey any license under intellectual property rights of IDT or any third parties.
IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be
reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.
Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the
property of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. All contents of this document are copyright of Integrated
Device Technology, Inc. All rights reserved.
© 2018 Integrated Device Technology, Inc.
2
September 27, 2018


Part Number F6101
Description Ku-Band SATCOM Receiver
Maker IDT
Total Page 2 Pages
PDF Download

F6101 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 F6101 Ku-Band SATCOM Receiver
IDT
2 F6102 Ka-Band SATCOM Receiver
Renesas
3 F6102 Ka-Band SATCOM Receiver
IDT
4 F6103 Common Data Link (CDL) RX
IDT





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy