Datasheet4U Logo Datasheet4U.com

F2972 - High Linearity Broadband SP2T

General Description

The F2972 is a single-pole double-throw (SP2T) reflective RF switch featuring high linearity and wide bandwidth.

Key Features

  • Supply voltage: +2.5V to +5.25V 1.8V and 3.3V compatible control logic 2mm x 2mm, 12-pin TQFN package Features (75Ω) Low insertion loss: 0.23dB at 204MHz 0.34dB at 1.8GHz High Isolation: 40dB at 1.8GHz P0.1dB compression of +37dBm at 204MHz Second Harmonic: -100dBc at 204MHz Third Harmonic: -120dBc at 204MHz Composite Second Order Distortion > 100dBc Composite Triple Beat Distortion > 100dBc Features (50Ω) Low insertion loss: 0.40dB at 2.4GHz 0.55dB at 8GHz High Isolation: 34dB at 2.4GHz High L.

📥 Download Datasheet

Datasheet Details

Part number F2972
Manufacturer IDT
File Size 3.86 MB
Description High Linearity Broadband SP2T
Datasheet download datasheet F2972 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
F2970 FOR FAN MOTOR SINGLE-PHASE FULL-WAVE DRIVER UTC
F2910 Constant Impedance SPST RF Switch Integrated Device Technology
F2910 SPST RF Switch Renesas
F2912 High Reliability SP2T RF Switch Renesas
F2913 SP2T RF Switch Renesas

Other Datasheets by IDT

Part Number Description
F2970 75 Ohm SP2T RF Switch
F2971 SP2T RF Switch
F2976 High Linearity Broadband SP2T
F2977 High Linearity Broadband SP2T
F2911 SPST RF Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
High Linearity Broadband SP2T 5MHz to 10GHz F2972 Datasheet Description The F2972 is a single-pole double-throw (SP2T) reflective RF switch featuring high linearity and wide bandwidth. This device is optimized from 5MHz to 1.8GHz to support downstream cable modem future migration for DOCSIS 3.1 applications, and operates at up to 10GHz to support a multitude of wireless RF applications. Superb performance is achieved when used in either 50Ω or 75Ω terminating impedance applications. The F2972 uses a single positive supply voltage of either +3.3V or +5.0V and is compatible with either 1.8V or 3.3V control logic. Competitive Advantage The F2972 provides extremely low insertion loss across the entire bandwidth while providing superb distortion performance. Optimized for DOCSIS 3.