Datasheet4U Logo Datasheet4U.com

5P49V60 - Clock Generator

General Description

The 5P49V60 is a programmable clock generator intended for automotive applications.

Configurations may be stored in on-chip One-Time Programmable (OTP) memory or changed using I2C interface.

This is IDT’s sixth generation of programmable clock technology (VersaClock 6E).

Key Features

  • Flexible 1.8V, 2.5V, 3.3V power-rails.
  • High-performance, low phase noise PLL, < 0.5ps RMS typical phase jitter on outputs.
  • Four banks of internal OTP memory.
  • In-system or factory programmable.
  • 2 select pins accessible with processor GPIOs or bootstrapping.
  • I2C serial programming interface.
  • 0xD0 or 0xD4 I2C address options allows multiple devices configured in a same system.
  • Reference LVCMOS output clock.
  • Four universal output pairs indivi.

📥 Download Datasheet

Datasheet Details

Part number 5P49V60
Manufacturer IDT
File Size 571.20 KB
Description Clock Generator
Datasheet download datasheet 5P49V60 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
5P49V60B Programmable Clock Generator Renesas
5P49V6901 Programmable Clock Generator Renesas
5P49V6913 Programmable Clock Generator Renesas
5P49V6914 Programmable Clock Generator Renesas
5P49V6965 6E Programmable Clock Generator Renesas

Other Datasheets by IDT

Part Number Description
5P49V6901 Programmable Clock Generator
5P49V6913 Programmable Clock Generator
5P49V6914 Programmable Clock Generator
5P49V6965 Clock Generator
5P49V6967 Clock Generator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
VersaClock® 6E Programmable Clock Generator 5P49V60 Datasheet Description The 5P49V60 is a programmable clock generator intended for automotive applications. Configurations may be stored in on-chip One-Time Programmable (OTP) memory or changed using I2C interface. This is IDT’s sixth generation of programmable clock technology (VersaClock 6E). The frequencies are generated from a single reference clock. The reference clock can come from one of the two redundant clock inputs. A glitchless manual switchover function allows one of the redundant clocks to be selected during normal operation. Two select pins allow up to four different configurations to be programmed and accessible using processor GPIOs or bootstrapping.