Datasheet4U Logo Datasheet4U.com

HY29F002T - 2 Megabit (256K x 8)/ 5 Volt-only/ Flash Memory

General Description

The HY29F002T is an 2 Megabit, 5 volt-only CMOS Flash memory organized as 262,144 (256K) bytes.

The device is offered in industrystandard 32-pin TSOP and PLCC packages.

The HY29F002T can be programmed and erased in-system with a single 5-volt VCC supply.

Key Features

  • n 5 Volt Read, Program, and Erase.
  • Minimizes system-level power requirements n High Performance.
  • Access times as fast as 45 ns n Low Power Consumption.
  • 20 mA typical active read current.
  • 30 mA typical program/erase current.
  • 1 µA typical CMOS standby current n Compatible with JEDEC Standards.
  • Package, pinout and command-set compatible with the single-supply Flash device standard.
  • Provides superior inadvertent write protection n Sector.

📥 Download Datasheet

Datasheet Details

Part number HY29F002T
Manufacturer SK Hynix
File Size 382.00 KB
Description 2 Megabit (256K x 8)/ 5 Volt-only/ Flash Memory
Datasheet download datasheet HY29F002T Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HY20-P Current Transducers HY 5 to 25-P LEM
HY2000 30 WATT POWER AMP ETC
HY2001 30 WATT POWER AMP ETC
HY2002 Power Amplifier ILP
HY2002220 Size 23 Stepper Motor ETC

Other Datasheets by SK Hynix

Part Number Description
HY29F002TC-45 2 Megabit (256K x 8)/ 5 Volt-only/ Flash Memory
HY29F002TC-55 2 Megabit (256K x 8)/ 5 Volt-only/ Flash Memory
HY29F002TC-70 2 Megabit (256K x 8)/ 5 Volt-only/ Flash Memory
HY29F002TC-90 2 Megabit (256K x 8)/ 5 Volt-only/ Flash Memory
HY29F002TT-45 2 Megabit (256K x 8)/ 5 Volt-only/ Flash Memory

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HY29F002T 2 Megabit (256K x 8), 5 Volt-only, Flash Memory KEY FEATURES n 5 Volt Read, Program, and Erase – Minimizes system-level power requirements n High Performance – Access times as fast as 45 ns n Low Power Consumption – 20 mA typical active read current – 30 mA typical program/erase current – 1 µA typical CMOS standby current n Compatible with JEDEC Standards – Package, pinout and command-set compatible with the single-supply Flash device standard – Provides superior inadvertent write protection n Sector Erase Architecture – Boot sector architecture with top boot block location – One 16 Kbyte, two 8 Kbyte, one 32 Kbyte and three 64K byte sectors – A command can erase any combination of sectors – Supports full chip erase n Erase Suspend/Resume – Temporarily suspends a sector erase ope