Datasheet4U Logo Datasheet4U.com

HT7610A - General Purpose PIR Controller

Description

The HT761x is a CMOS LSI chip designed for use in automatic PIR lamp control.

It can operate with a 2-wire configuration for triac applications or with a 3-wire configuration for relay applications.

Features

  • Operating voltage: 5V~12V.
  • Standby current: 100mA (Typ. ).
  • On-chip regulator.
  • Adjustable output duration.
  • CDS input.
  • 40 second warm-up.

📥 Download Datasheet

📁 Similar Datasheet

  • HT7610 - General Purpose PIR Controller (Holtek Semiconductor Inc)
  • HT7611 - General Purpose PIR Controller (Holtek Semiconductor Inc)
  • HT7660 - CMOS Switched-Capacitor Voltage Converter (Holtek Semiconductor Inc)
  • HT7005L - LCD (HYES Optoelectronics)
  • HT7017 - High-precision single-phase metering chip (HiTrendtech)
  • HT7020 - three-port low voltage detector (UMW)
  • HT7022 - three-port low voltage detector (UMW)
  • HT7024 - three-port low voltage detector (UMW)
  • HT7024A - Voltage Detector (Holtek Semiconductor Inc)
  • HT7024A-1 - (HT70xxA-1) Voltage Detector (Holtek Microelectronics)
Other Datasheets by Holtek Semiconductor
  • HT7610B - General Purpose PIR Controller
  • HT7611A - General Purpose PIR Controller
  • HT7611B - General Purpose PIR Controller
  • HT7612 - General Purpose PIR Controller
  • HT7612B - General Purpose PIR Controller
  • HT7022A - 2.2V Voltage Detector
  • HT7022A-1 - Voltage Detector
  • HT7022A-2 - Voltage Detector

Full PDF Text Transcription

Click to expand full text
HT7610A/HT7610B/HT7611A/HT7611B General Purpose PIR Controller Features · Operating voltage: 5V~12V · Standby current: 100mA (Typ.) · On-chip regulator · Adjustable output duration · CDS input · 40 second warm-up Applications · PIR light controllers · Motion detectors · ON/AUTO/OFF selectable by MODE pin · Override function · Auto-reset if the ZC signal disappears over 3 seconds · 16-pin DIP package · Alarm systems · Auto door bells General Description The HT761x is a CMOS LSI chip designed for use in automatic PIR lamp control. It can operate with a 2-wire configuration for triac applications or with a 3-wire configuration for relay applications.
Published: |