Datasheet4U Logo Datasheet4U.com

HT74164 - 8-Bit Serial-In/Parallel-Out Shift Register

Description

The HT74164 is identical in pin-out to the LS164.

The device inputs are compatible with standard CMOS outputs; with pull-up resistors, they are compatible with LSTTL outputs.

The HT74164 is a 8-bit, serial input to parallel-output shift register.

Features

  • Operating voltage: 2.0V~6.0V.
  • A 8-bit, serial-input to parallel-output shift register.
  • Gated serial data inputs.
  • Asynchronous master reset.
  • Output drive capability: 10 LSTTL Loads.
  • Outputs Directly Interface to CMOS.
  • High noise immunity characteristic of CMOS Devices.
  • 14-pin DIP/SOP package General.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HT741A GENERAL PURPOSE SINGLE OPERATIONAL AMPLIFIER HTCSEMI
HT7430 Negative Voltage Regulator Holtek Semiconductor Inc
HT7450 Negative Voltage Regulator Holtek Semiconductor Inc
HT7463A Asynchronous Step Down Converter Holtek Semiconductor
HT7463B Asynchronous Step Down Converter Holtek Semiconductor

Other Datasheets by Holtek Semiconductor

Part Number Description
HT7121-1 30mA Low Power LDO
HT7121-2 30mA TinyPower LDO
HT7123-1 30mA Low Power LDO
HT7123-2 30mA TinyPower LDO
HT7125-1 30mA Low Power LDO

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HT74164 8-Bit Serial-In/Parallel-Out Shift Register Features · Operating voltage: 2.0V~6.0V · A 8-bit, serial-input to parallel-output shift register · Gated serial data inputs · Asynchronous master reset · Output drive capability: 10 LSTTL Loads · Outputs Directly Interface to CMOS · High noise immunity characteristic of CMOS Devices. · 14-pin DIP/SOP package General Description The HT74164 is identical in pin-out to the LS164. The device inputs are compatible with standard CMOS outputs; with pull-up resistors, they are compatible with LSTTL outputs. The HT74164 is a 8-bit, serial input to parallel-output shift register. Two serial data inputs, A1 and A2, are provided so that one input may be used as a data enable. Data is entered on each rising edge of the clock.
Published: |