HI-8200 Datasheet | Holt Integrated Circuits

November 2017 HI-8200, HI-8201, HI-8202 Quad 10 Ohm +/-12V outside-the-rails Analog Switch with Open Circuit when Power Off GENERAL DESCRIPTION The HI-8200 is a quad analog CMOS switch fabricated with Silicon-on-Insulator (SOI) technology for latch-up free operation and maximum switch isolation. High voltage gate drive is entirely created on-chip enabling +/-12V switching range from a single 3.3V or 5V supply. These switches are ideally suited for applications demanding low switch leakage when the power pins are 0V. At 25°C and with VDD from 3.0V to 5.5V, the switch resistance (RON) is typically 8W. RON is independent of VDD. In a switching range of -5V to +5V, the maximum deviation of RON from flat is less than 5%. These switches conduct equally well in either direction. Power down and Off state leakages are less than 10n A maximum. Charge injection is less than 10p C. Switching times are typically 180ns to the On state and 60ns to the Off state. The onboard charge pump allows an On/Off cycle time of 5KHz for all four switches simultaneously before the switching range bees restricted. The HI-8200 provides four each normally open switches when the switch control inputs are low. The HI-8201 provides four each normally closed switches when the switch control inputs are low. The HI-8202 provides a bination of two normally closed and two normally open switches. Industry-standard plastic package options include 20-pin TSSOP, 16-pin DIP and 16-pin QFN. Ceramic packaging is available on request. All three products are offered in both industrial (-40°C to +85°C) and extended (-55°C to +125°C) temperature range options. Features - CMOS analog switches with up to +/-12V switching range from a single 3.3V or 5V supply - Low RON: 10W max at 25°C - Robust CMOS Silicon-on-Insulator (SOI) technology - Switch nodes are open-circuit when chip is powered down - SOI switch isolation with 1n A typical Off leakage - ESD protection > 4KV HBM - Fast switching time with...