Datasheet4U Logo Datasheet4U.com

HMC240 - GaAs MMIC SPDT SWITCH

Description

The HMC240 is a low cost GaAs MESFET SPDT switch chip.

Covering DC to 4.0 GHz, this switch offers high isolation and low insertion loss.

RF1 and RF2 are reflective shorts when “off”.

Features

  • Broadband Performance: DC - 4.0 GHz Low Insertion Loss: 0.5 dB @ 2.0 GHz High IIP3: +48 dBm Small Size: 0.70 mm x 0.70 mm x 0.13 mm Typical.

📥 Download Datasheet

Datasheet Details

Part number HMC240
Manufacturer Hittite Microwave Corporation
File Size 115.69 KB
Description GaAs MMIC SPDT SWITCH
Datasheet download datasheet HMC240 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HMC240A GaAs MMIC SPDT SWITCH Analog Devices
HMC241ALP3E GaAs Nonreflective SP4T Switch Analog Devices
HMC241AQS16 GaAs MMIC SP4T NON-REFLECTIVE SWITCH Analog Devices
HMC241AQS16E GaAs MMIC SP4T NON-REFLECTIVE SWITCH Analog Devices
HMC241LP3 GaAs MMIC SP4T NON-REFLECTIVE SWITCH Analog Devices

Other Datasheets by Hittite Microwave Corporation

Part Number Description
HMC207S8 GaAs MMIC SMT DOUBLEBALANCED MIXER
HMC208MS8 GaAs MMIC SMT DOUBLEBALANCED MIXER
HMC210MS8 GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR
HMC216MS8 GaAs MMIC SMT DOUBLE-BALANCED FET MIXER
HMC218MS8 GaAs MMIC SMT DOUBLEBALANCED MIXER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
v00.0403 MICROWAVE CORPORATION HMC240 GaAs MMIC SPDT SWITCH DC - 4.0 GHz Features Broadband Performance: DC - 4.0 GHz Low Insertion Loss: 0.5 dB @ 2.0 GHz High IIP3: +48 dBm Small Size: 0.70 mm x 0.70 mm x 0.13 mm Typical Applications The HMC240 is ideal for: • Telecom Infrastructure • Microwave Radio & VSAT • Military & Space • Test Instrumentation Functional Diagram General Description The HMC240 is a low cost GaAs MESFET SPDT switch chip. Covering DC to 4.0 GHz, this switch offers high isolation and low insertion loss. RF1 and RF2 are reflective shorts when “off”. The switch can operate using either two negative control logic inputs of -5/0V or two positive control voltage logic inputs of 0/+5V. All data is tested with the chip in a 50 Ohm test fixture connected via 0.
Published: |