Datasheet4U Logo Datasheet4U.com

HA16121FPJ - Switching Regulator for Chopper Type DC/DC Converter

Description

HA16116FP/FPJ and HA16121FP/FPJ are dual-channel PWM switching regulator controller ICs for use in chopper-type DC/DC converters.

This IC series incorporates totem pole gate drive circuits to allow direct driving of a power MOS FET.

Features

  • Wide operating supply voltage range.
  • (3.9 V to 40.0 V) Wide operating frequency range (600 kHz maximum operation) Direct power MOS FET driving (output current ±1 A peak in maximum rating) Pulse-by-pulse overcurrent protection circuit with intermittent operation function (When overcurrent state continues beyond time set in timer, the IC operates intermittently to prevent excessive output current. ).
  • Grounding the ON/OFF pin turns the IC off, sav.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HA16150P High-Speed Current Mode Push-Pull PWM Control IC Renesas Technology
HA16150T High-Speed Current Mode Push-Pull PWM Control IC Renesas Technology
HA16158FP PFC & PWM Control IC Renesas Technology
HA16158P PFC & PWM Controller Renesas Technology
HA16163T Synchronous Phase Shift Full-Bridge Control IC Renesas Technology

Other Datasheets by Hitachi Semiconductor (now Renesas)

Part Number Description
HA16121FP Switching Regulator for Chopper Type DC/DC Converter
HA16120FP Switching Regulator for Chopper Type DC/DC Converter
HA16120FPJ Switching Regulator for Chopper Type DC/DC Converter
HA16129FPJ Single Watchdog Timer
HA16103FPJ Watchdog Timer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HA16116FP/FPJ, HA16121FP/FPJ Switching Regulator for Chopper Type DC/DC Converter Description HA16116FP/FPJ and HA16121FP/FPJ are dual-channel PWM switching regulator controller ICs for use in chopper-type DC/DC converters. This IC series incorporates totem pole gate drive circuits to allow direct driving of a power MOS FET. The output logic is preset for booster, step-down, or inverting control in a DC/DC converter. This logic assumes use of an N-channel power MOS FET for booster control, and a P-channel power MOS FET for step-down or inverting control. HA16116 includes a built-in logic circuit for step-down control only, and one for use in both step-down and inverting control. HA16121 has a logic circuit for booster control only and one for both step-down and inverting control.
Published: |