Datasheet4U Logo Datasheet4U.com

HMF51232M4V - FLASH-ROM MODULE

General Description

The HMF51232M4V is a high-speed flash read only memory (FROM) module containing 524,288 words organized in a x32bit configuration.

The module consists of four 512Kx 8 FROM mounted on a 72-pin, single-sided, FR4-printed circuit board.

Key Features

  • w Access time : 55,70, 90 and 120ns w High-density 2MByte design w High-reliability, low-power design w Single + 3V ± 0.3V power supply w Easy memory expansion wAll inputs and outputs are TTL- compatible w FR4-PCB design w Low profile 72-pin SIMM w Minimum 1,000,000 write/erase cycle w Sector erases architecture w Sector group protection w Temporary sector group unprotection w Part Identification HMF51232M4V : Gold Plate Lead PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 SYMBOL Vss A3 A2 A1 A0 Vcc A11.

📥 Download Datasheet

Datasheet Details

Part number HMF51232M4V
Manufacturer Hanbit Electronics
File Size 459.16 KB
Description FLASH-ROM MODULE
Datasheet download datasheet HMF51232M4V Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HMF06020 Power Optimized GaAs FET Harris Microwave Semiconductor

Other Datasheets by Hanbit Electronics

Part Number Description
HMF51232M4D FLASH-ROM MODULE
HMF51232M4G FLASH-ROM MODULE
HMF51232M4S FLASH-ROM MODULE
HMF51232M4Y FLASH-ROM MODULE
HMF51232J4 FLASH-ROM MODULE 2MByte (512K x 32-Bit) - 68-Pin JLCC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HANBit HMF51232M4V FLASH-ROM MODULE 2MByte (512K x 32-Bit) Part No. HMF51232M4V GENERAL DESCRIPTION The HMF51232M4V is a high-speed flash read only memory (FROM) module containing 524,288 words organized in a x32bit configuration. The module consists of four 512Kx 8 FROM mounted on a 72-pin, single-sided, FR4-printed circuit board. Commands are written to the command register using standard microprocessor write timings. Register contents serve as input to an internal state-machine, which controls the erase and programming circuitry. Write cycles also internally latch addresses and data needed for the programming and erase operations. Reading data out of the device is similar to reading from 12.0V flash or EPROM devices.