HFDOM40C-xxxSx Datasheet | Hanbit Electronics

HANBit HFDOM40C-xxx Sx 40Pin Flash Disk Module Min.8MB ~ Max.512MB, True IDE Interface Mode, 3.3V / 5.0V Operating Part No. HFDOM40C-xxx Sx 1. PRODUCT OVERVIEW GENERAL DESCRIPTION The HFDOM40C-xxx Sx series 40Pin Flash Disk Module is a flash technology based with True IDE interface flash memory card. It is constructed with flash disk controller chip and NAND -type (Samsung) flash memory device. The HFDOM40C-xxx Sx series operates in both 3.3 -Volt and 5.0-Volt power supplies. It es in capacity of 8, 16, 32, 64, 128, 192, 256 MB and up to 512 MB formatted 40Pin type . .. By optimizing flash memory management, the life of this HFDOM40C-xxx Sx series can be extended to its maximum level. Because the ECC function is included, the correctness of data transfer between the HFDOM40C-xxx Sx series and a True IDE patible interface device can be guaranteed. The HFDOM40C-xxx Sx series is fully patible with applications such as CPU card / board, set top box, industry / military PC / Notebook, security equipment, measuring instrument and embedded systems. Features True IDE patible host interface Direct plug in for 3.5″ IDE Connectors 40 pin 2.54mm IDE Connector Very high performance, very low power consumption Automatic error correction Support 3 power save mode : stop/idle/active Support for CIS implemented with 256 bytes of attribute memory 3.3V/5.0V operation voltage Host data transfer rate : 20MB/s Flash data transfer rate : 10MB/s Host Interface bus width : 8/16 bit Access Flash Interface bus width : 8 bit Access Capacity : Min. 8MB ~ Max. 512MB MTBF : 1,000,000 hours, minimum 30,000 insertions Operating vibration : 15G peak to peak maximum Operating shock : 1,000G maximum PRODUCT SPECIFICATIONS Capacities : 8, 16, 32, 64, 128, 192, 256, 384 and up to 512 MB (formatted) Operating Voltage : Operating mode Stop mode 3.3V / 5.0V ± 10% Power consumptions : 40 m A (typ), 70 m A (Max) 30 u A (Max) 0° C to + 70° C - 10° C to + 85° C 95%(Max) Environment...