Description | H.E.I. Axial Lead Resistors are constructed with steatite ceramic cores or alumina, terminated with welded cap and lead assemblies and wound with the finest alloy resistance wires welded to the cap and lead assemblies. Our special formula of vitreous enamel (ALVR) or silicone (ALSR) coatings are then used to insulate the resistors. This construction insures long life, durability, and reliability. ... |
Features |
AVAILABLE
RESISTANCE TOLERANCE: Standard tolerance is ±5% (J) for 1 Ohm, and greater and ±10% (K) for less than 1 ohm. Available Tolerances: F = ±1%, J = ±5%, K = ±10% NON-INDUCTIVE: Ayrton-Perry type non-inductive winding is available. When required add “NI” to the part number. LEADS: Hot tin-dipped leads with dimensions as shown in the above char...
|
Datasheet | ALVR-1 Datasheet - 85.59KB |