Datasheet4U Logo Datasheet4U.com

FX11LA-92S-SV - 0.5mm Pitch Connectors

This page provides the datasheet information for the FX11LA-92S-SV, a member of the FX11 0.5mm Pitch Connectors family.

Datasheet Summary

Features

  • 1. Low Profile Design The board to board mating height of 2mm, 2.5mm and 3mm suits smaller, thinner case designs. 10 Signal: 1 Ground Arrangement 2. Improved Transmission Efficiency Between Boards Transmission characteristics have been improved through a design that fixes ground plates to both sides of the header and receptacle. Ground Plate Signal contact m 5m 0.7 mm m 5m Housing 3. 10 Signal:1 Ground Arrangement Signal and ground are arranged in a ratio of 10:1 with the ground plate SMT c.

📥 Download Datasheet

Datasheet preview – FX11LA-92S-SV

Datasheet Details

Part number FX11LA-92S-SV
Manufacturer HRS
File Size 763.56 KB
Description 0.5mm Pitch Connectors
Datasheet download datasheet FX11LA-92S-SV Datasheet
Additional preview pages of the FX11LA-92S-SV datasheet.

📁 Similar Datasheet

  • FX1160 - High Output/ Short Arc Xenon Flashlamp with Internal Reflector (PerkinElmer Optoelectronics)
  • FX1161 - High Output/ Short Arc Xenon Flashlamp with Internal Reflector (PerkinElmer Optoelectronics)
  • FX1162 - High Output/ Short Arc Xenon Flashlamp with Internal Reflector (PerkinElmer Optoelectronics)
  • FX1163 - High Output/ Short Arc Xenon Flashlamp with Internal Reflector (PerkinElmer Optoelectronics)
  • FX1164 - High Output/ Short Arc Xenon Flashlamp with Internal Reflector (PerkinElmer Optoelectronics)
  • FX1165 - High Output/ Short Arc Xenon Flashlamp with Internal Reflector (PerkinElmer Optoelectronics)
  • FX118 - Duplex Frequency Inverter (Consumer Microcircuits Limited)
  • FX1010 - Photo Transistor Coupler (LYG)
  • FX1011 - Photo Transistor Coupler (LYG)
  • FX1012 - Photo Transistor Coupler (LYG)
Other Datasheets by HRS

Full PDF Text Transcription

Click to expand full text
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections FX11 Series Stacking height : 2mm Stacking height : 2.5mm, 3mm ■Features 1. Low Profile Design The board to board mating height of 2mm, 2.5mm and 3mm suits smaller, thinner case designs. 10 Signal: 1 Ground Arrangement 2.
Published: |