Datasheet4U Logo Datasheet4U.com

INA-01100 - Silicon Bipolar MMIC Amplifier

Description

The INA-01100 is a low-noise silicon bipolar Monolithic Microwave Integrated Circuit (MMIC) feedback amplifier chip.

It is designed for narrow or wide bandwidth industrial and military applications that require high gain and low noise IF or RF amplification.

Features

  • Cascadable 50 Ω Gain Block.
  • Low Noise Figure: 1.7 dB Typical at 100 MHz.
  • High Gain: 32.5 dB Typical at 100 MHz.
  • 3 dB Bandwidth: DC to 500␣ MHz.
  • Unconditionally Stable (k>1) The INA series of MMICs is fabricated using HP’s 10 GHz fT, 25 GHz fMAX, ISOSAT™-I silicon bipolar process which uses nitride self-alignment, submicrometer lithography, trench isolation, ion implantation, gold metallization and polyimide intermetal dielectric and scratch protecti.

📥 Download Datasheet

Datasheet preview – INA-01100

Datasheet Details

Part number INA-01100
Manufacturer HP
File Size 48.92 KB
Description Silicon Bipolar MMIC Amplifier
Datasheet download datasheet INA-01100 Datasheet
Additional preview pages of the INA-01100 datasheet.

📁 Similar Datasheet

  • INA101 - High Accuracy INSTRUMENTATION AMPLIFIER (Burr-Brown Corporation)
  • INA101 - Low-Power Instrumentation Amplifier (AnalogySemi)
  • INA102 - Low Power INSTRUMENTATION AMPLIFIER (Burr-Brown Corporation)
  • INA102 - Low-Power Instrumentation Amplifier (AnalogySemi)
  • INA103 - Low Noise/ Low Distortion INSTRUMENTATION AMPLIFIER (Burr-Brown Corporation)
  • INA104 - Very-High Accuracy INSTRUMENTATION AMPLIFIER (Burr-Brown Corporation)
  • INA105 - Precision Unity Gain DIFFERENTIAL AMPLIFIER (Burr-Brown Corporation)
  • INA105 - Precision Unity Gain Differential Amplifier (Texas Instruments)
  • INA106 - Precision Gain = 10 DIFFERENTIAL AMPLIFIER (Burr-Brown Corporation)
  • INA106 - Precision Gain = 10 Differential Amplifier (Texas Instruments)
Other Datasheets by HP

Full PDF Text Transcription

Click to expand full text
Low Noise, Cascadable Silicon␣ Bipolar MMIC Amplifier Technical Data INA-01100 Features • Cascadable 50 Ω Gain Block • Low Noise Figure: 1.7 dB Typical at 100 MHz • High Gain: 32.5 dB Typical at 100 MHz • 3 dB Bandwidth: DC to 500␣ MHz • Unconditionally Stable (k>1) The INA series of MMICs is fabricated using HP’s 10 GHz fT, 25 GHz fMAX, ISOSAT™-I silicon bipolar process which uses nitride self-alignment, submicrometer lithography, trench isolation, ion implantation, gold metallization and polyimide intermetal dielectric and scratch protection to achieve excellent performance, uniformity and reliability. Chip Outline[1] RF OUT GND 2 Description The INA-01100 is a low-noise silicon bipolar Monolithic Microwave Integrated Circuit (MMIC) feedback amplifier chip.
Published: |