6A05 THRU 6A10
GENERAL PURPOSE PLASTIC SILICON RECTIFIER
REVERSE VOLTAGE:
50 to 1000 VOLTS
FORWARD CURRENT:
6.0 AMPERE
FEATURES
· High surge current capability
· Plastic package has Underwriters Laboratory
Flammability Classification 94V-O ctilizing
Flame Retardant Epoxy Molding Compound.
· Void-free Plastic in a R-6 package.
· High current operation 6.0 ampere at TA=60℃
· Exceeds environmental standards of MIL-S-19500/228
R-6
MECHANICAL DATA
Case: Molded plastic, R-6
Epoxy: UL 94V-O rate flame retardant
Lead: Axial leads, solderable per MIL-STD-202,
method 208 guaranteed
Polarity: Color band denotes cathode end
Mounting position: Any
Weight: 0.07ounce, 2.1gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Ratings at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
.375"(9.5mm) Lead Length at TA=60℃
Peak Forward Surge Current,
8.3ms single half-sine-wave
superimposed on rated load (JEDEC method)
Maximum Forward Voltage
at 6.0A DC and 25℃
Maximum Reverse Current
at Rated DC Blocking Voltage
at TA=25℃
TA=100℃
Typical Junction Capacitance (Note 1)
Typical Thermal Resistance (Note 2)
Operating Junction Temperature Range
Storage Temperature Range
Symbols 6A05
6A1
6A2
6A4
6A6
6A8 6A10 Units
VRRM 50 100 200 400 600 800 1000 Volts
VRMS
35
70 140 280 420 560 700 Volts
VDC 50 100 200 400 600 800 1000 Volts
I(AV) 6.0 Amp
IFSM 400 Amp
VF 1.1 Volts
10.0
IR uAmp
100
CJ
RθJA
150 pF
10 ℃/W
TJ
-55 to +150
℃
Tstg -55 to +150 ℃
NOTES:
1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC.
2- Thermal Resistance From Junction to Ambient 0.375"(9.5mm) lead length P.C.B. Mounted with 1.1x1.1" (30x30mm)copper pads.
