HVI17 Datasheet | HITRON ELECTRONICS

FEATURES : ACMODATE UNIVERSAL AC SOURCES PACT PCB OPEN FRAME FORMAT MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB. 22 & FCC CLASS B CE MARKING PLIANCE SPECIFICATION INPUT SPECIFICATION Input Voltage: Range typ. 90-264Vac. Rating 100-240Vac. Input Connector: Molex 5273 or JST B5P-VH. Input Frequency: 47-63Hz. Inrush Current: ≤30.6A @ 230Vac by thermister. Input Current: Typ. 0.6m A @ 115Vac, 0.3m A @ 230Vac. Dielectric Withstand: Meet IEC950. EMI: Meet CISPR PUB.22 & FCC CLASS B. Hold-up Time: Typ.20m S @ 110Vac, 80m S @ 230Vac. .. Earth Leakage: Typ. less than 0.3m A @ 230Vac. Overload Protection (OLP): Fully protected against output overload and short circuit. Consult the factory for OLP setting. OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: Typ. 17-18 Watts. Output Connector: Molex 5267-NA or JST B8B-XH-A. Line Regulation: Typ. 0.1%. Load Regulation: Main VO1: typ. ±1.0-2.0%. Aux. VO2 & VO3: typ. ±2-3.0% (P.R.). Noise & Ripple: VO1 typ. 2% peak to peak. VO2 & VO3 typ. 1% peak to peak. OVP: Built-in main VO1 only. Adjustability: Available at main VO1 only. GENERAL SPECIFICATION Efficiency: Typ. 70%. Switching Frequency: Fixed-freq. at 38K Hz. Circuit Topology: Fixed-frequency flyback circuit. Transient Response: Output voltage returns in less than 3m S following a 25% load change. Safety standard: UL1950/EN60950 Class I. Operating Temperature: 0 to +50°C. Storage Temperature: -20 to +85°C. Temperature Coefficient: Typ. 0.04% /°C. Cooling: Free air convection. Construction: PCB open frame format. Power Density: 1.82 Watts / Cubic Inch. -13- OUTPUT VOLTAGE/CURRENT RATINGS CHART TRIPLE OUTPUT MODEL NO. HVI17-30 HVI17-31 HVI17-33 MAIN VO1 @ ◇ Typ. 2.2A 2.2A 2.2A Volt. +5V +5V +5V Max. 3.0A 3.0A 3.0A Typ. 0.3A 0.3A 0.3A AUX. VO2 Volt. +12V +12V +15V Max. 0.6A 0.6A 0.6A Typ. 0.2A 0.2A 0.2A AUX. VO3 Volt. -12V - 5V -15V Max. 0.3A 0.3A 0.3A Symbol: " " OVP built-in. "@" Adjustable. "◇" Floating (or isolated)...