900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Gigaset

C470IP Datasheet Preview

C470IP Datasheet

Review

No Preview Available !

Gigaset C470 IP
Easy to
install
CORDLESS HOME COMMUNICATION
Connection overview
5
6
5
4
31
2
1 Prepare the handset: insert the batteries
2 Connect the charging cradle to the mains power supply and charge the batteries
3 Connect the phone cord and power lead to the base station
4 Connect the base station to the fixed line network and the mains power supply
5 Connect the base station to the Internet, connect the base station to the router
(Connection via router and modem or via router with integrated modem)
6 PC in LAN – for advanced configuration of the Gigaset C470 IP base station
Safety precautions
2
Warning:
Read the safety precautions and the user guide on the CD before use.
Explain their contents and the potential hazards associated with using the telephone to your children.
> Only use the mains adapters supplied, as indicated on the underside of the base station or charging
cradle.
> Only use the recommended, rechargeable batteries, i.e. never use a conventional (non-rechargea-
ble) battery or other battery types as this could result in significant health risks and personal injury.
For example, the batteries could explode. The phone could also malfunction or be damaged as a result
of using batteries that are not of the recommended type.
> Insert rechargeable batteries with the correct polarity, and use them in accordance with the user guide
(polarity symbols can be seen in or on the handset's battery compartment).
> Batteries should not be disposed of in general household waste. Observe the local waste disposal
regulations, details of which can be obtained from your local authority or the dealer you purchased
the product from.
> The operation of medical appliances may be affected. Be aware of the technical conditions in your
particular environment, e.g. doctor's surgery.
> Do not hold the rear of the handset to your ear when it is ringing or when the handsfree function is
activated. Otherwise you risk serious and permanent damage to your hearing.
The handset may cause an unpleasant humming noise in hearing aids.
> Do not install the base station or charging cradle in bathrooms or shower rooms. The handset, base
station and charging cradle are not splashproof.
> The charging cradle and base station are designed for use in enclosed dry rooms with a temperature
range of +5 °C to +45 °C.
> Do not use the phone in environments with a potential explosion hazard, e.g. paint shops.
> Never expose the telephone to heat sources, direct sunlight or other electrical appliances.
> Protect your Gigaset from moisture, dust, corrosive liquids and vapours.
> If you give your Gigaset to someone else, make sure you also give them the user guide.
> Please remove faulty base stations from use or have them repaired by Siemens Service, as they could
interfere with other wireless services.
> All electrical and electronic equipment must be disposed of separately from general household waste
using the sites designated by local authorities.
If a product displays this symbol of a crossed-out rubbish bin, the product is subject to
European Directive 2002/96/EC.
The appropriate disposal and separate collection of used equipment serve to prevent
potential harm to the environment and to health. They are a requirement for the re-use
and recycling of used electrical and electronic equipment.
For further information on disposing of your used equipment, please contact your local
authority, your refuse collection service or the dealer you purchased the product from.
Warning:
When the keypad lock is active, you cannot call emergency numbers.
Preparing the handset
6
1 Inserting the supplied batteries and closing the battery cover
> Check the polarity when inserting the batteries
(see symbols in or on the battery compart-
ment).
> Only use the recommended rechargeable
batteries.
Once the batteries have been inserted, the
handset switches on automatically.
A Insert the battery compartment
cover into the notches at the top of
the battery compartment.
A
B Then press the battery compart-
ment cover until it clicks into
place.
> The display is protected by a plastic film. Please remove the protective film.
B
2 Connecting the charging cradle and charging the batteries
B > Observe the
sequence (A, B).
> Place the handset in the charging cradle and
wait until the batteries are fully charged.
> Do not put the handset back in the charg-
ing cradle until the batteries are fully dis-
A charged through use.
> After the first battery charge and
discharge, replace your handset in the
charging cradle after every call.
> The battery charging status is displayed
in the idle display: = e V U
(flat to full).
Pack contents
5
1
2
3
6
7
34
8
10
11
9
1 Gigaset C470 IP base station
2 Mains adapter for connecting the base station to the mains power supply
3 Phone cord for connecting the base station to the fixed line network
4 Ethernet (LAN) cable for connecting the base station to the router (LAN/Internet)
5 Gigaset C47H handset
6 Two batteries for the handset (uncharged)
7 Battery compartment cover for the handset
8 Belt clip for the handset
9 Mains adapter for connecting the charging cradle to the mains power supply
10 Charging cradle for the handset
11 CD with the user guide for your Gigaset.
If the firmware for your base station is updated, the user guide will also be updated and
made available for download on the Internet at www.siemens.com/gigaset.
Connecting the base station
7
3 Connecting the phone cord and power lead to the base station
B
A
A Insert the phone cord into the lower
connection socket at the rear of the
base station.
B Insert the power lead of the mains
adapter into the upper connection
socket at the rear of the base station.
C
C Insert both cables into their respec-
tive cable recesses.
Only use the supplied phone cord and
the supplied mains adapter.
4 Connecting the base station to the fixed line network and
mains power supply
A Insert the phone cord into the
fixed line network connection
socket.
B Then insert the mains adapter
into the mains socket.
BA
Keep the mains adapter plugged in at
all times for operation, as the phone
does not work without mains connec-
tion.
You can now use your phone to make calls via the fixed line network.
Keys and functions on the handset
4
A Display keys:
B Start function displayed to the left or right of the
bottom display line.
d
Handsfree key:
Switch between earpiece and handsfree mode
(key lights up)
c
Talk key:
After entering number:
start dialling via VoIP/fixed line network (press
briefly/press and hold); accept call
p Control key:
Open directory (press down);
Open list of online directories (press and hold the
bottom of the control key);
Scroll through menus (press up or down);
navigate in text
f
Message key:
Open calls and messages lists;
Flashes: new message/new call
a
End call key, On/Off key:
End call, cancel function (press briefly);
Return to idle status (press and hold),
Switch handset on/off (press and hold)
Ê
Fast access key (press and hold):
Listen to messages on the network mailbox
*
* key: Ringer on/off (press and hold)
#
# key: Keypad lock on/off (press and hold)
S
Recall/pause key (fixed line network)
C
Open call-by-call list (fixed line)
Version: 09.11.2007
A 3 1 0 0 8 - M1 9 1 6 - C4 0 1 - 1 - 7 6 4 3
Connecting the base station
5 Connecting the base station with the router (Internet)
8
B
A
A Connect one Ethernet cable plug to
the LAN socket at the side of the base
station.
B Insert the second Ethernet cable plug
into a LAN socket on the router.
Use the Ethernet cable supplied.
As soon as the cable connecting the phone and router
is plugged in, the key lights up on the front of the
base station (paging key).
6 Connecting the PC to the router
Further configuration of the base station can be performed via a PC in the LAN.
> Connect the PC network connection to a free LAN socket on your router.




Gigaset

C470IP Datasheet Preview

C470IP Datasheet

Review

No Preview Available !

Saving VoIP access data
9
Before you can use the Internet (VoIP) to phone any other subscribers on the Internet, the
fixed line network or the mobile phone network, you need a VoIP account.
> Set up a VoIP account with a VoIP provider.
> Have the VoIP account data you received from your VoIP provider to hand. You must now
save this data in your base station.
You will need:
> Your authentication name, your password*
> For some VoIP providers, your user name
Please note:
> The procedure below requires that dynamic assignment of IP addresses, i.e. the DHCP
server, is activated on your router.
If the router's DHCP server is not activated or if the base station needs to be assigned a
fixed IP address for LAN access for another reason, you must now save this IP address in
the base station:
v ¢ Settings ¢ Base ¢ Local Network
You will find more detailed information about this in the user guide on the enclosed CD.
> VoIP should be set as the standard connection for your phone (default setting). If the con-
nection to your provider's VoIP server cannot be established due to incorrect/incomplete
data, you will immediately receive messages to that effect.
*.) Automatic configuration:
If your provider supports "automatic configuration", you will receive an "auto configuration code" from
your provider instead of an authentication name and password.
VoIP configuration with an auto configuration code is described in the user guide on the accompanying
CD.
After configuration, please proceed as described in section 12 .
Saving VoIP access data
11 Entering your name in the Gigaset.net directory
Connection Assist.
Start assistant
for Gigaset.net?
Connection Assist.
Your Gigaset.net
Nickname:
No Yes
Ý OK
13
> Press the display key below §Yes§.
> Using the number keys, enter the name
that you would like to be listed under in
the Gigaset.net directory.
> Press the display key below §OK§.
If an entry already exists with this name, the message "Nickname already exists! " will appear.
You will be prompted to enter a name again.
If an entry in the Gigaset.net directory is successful, the message
"Your user name is successfully added to Gigaset.net!" will be shown.
If the attempt to create the entry fails (e.g. because the phone is not connected to the Inter-
net), a message to this effect is displayed briefly.
You can then create the entry later via the Gigaset.net directory.
Saving VoIP access data
10
7 Starting the configuration process
When your handset is sufficiently charged (approx. 20 minutes after you have placed it in the
charging cradle), the message key f on the handset flashes.
> Press the message key on the handset.
8 Starting the connection assistant, entering the PIN
Connection Assist.
Start assistant
for entry of VoIP
connection data?
No Yes
System PIN
Please enter
System PIN:
[- - - -]
Ý OK
> Press the display key below §Yes§.
> Using the number keys, enter the base
station's system PIN. By default, the PIN
is "0000".
If the connection assistant does not start properly, you can start it via the menu:
v ¢ Settings ¢ Telephony ¢ Connection Assist.
Saving VoIP access data
14
12 Completing the VoIP settings
If all the settings are correct and if the phone can establish a connection to the VoIP server,
then the internal name of the handset will be displayed (example):
ÐV
INT 1
INT Time
You can now use your phone to make calls via the
fixed line network and the Internet. Callers can contact
you on your fixed line network number, your
Gigaset.net number or your VoIP number.
To ensure that you can always be reached via the Internet, the router must be permanently
connected to the Internet.
13 Testing your VoIP connection
If, instead of the internal number, a message is displayed, you can test the base station's con-
nection to the Internet, e.g. by calling the Gigaset.net echo service:
> Enter one of the following phone numbers:
12341#9 (English)
12342#9 (Dutch)
12343#9 (Italian)
12344#9 (French)
12345#9 (German)
12346#9 (Spanish)
> Press the talk key c.
> When prompted, speak into the microphone on the handset.
If you hear your own voice, your base station is connected to the Internet.
If you do not hear your voice, check your phone and router settings.
In the user guide on the enclosed CD, you will find detailed information
about setting up and operating your phone, as well as possible solu-
tions to frequently asked questions and common problems.
Saving VoIP access data
9 Selecting a provider and loading provider data to the
base station
Select Country
Germany
England
France
Netherlands, the
Ý OK
Select Provider
Provider 1
Provider 2
Provider 3
Provider 4
Ý
OK
11
> Select your country with the control
key p (press down).
> Press the display key below §OK§.
> Select your provider with the control
key p (press down).
> Press the display key below §OK§.
If your provider does not appear in the list, you have the following options:
> Press the display key twice and proceed as described under 10 . You will only be able
to use the VoIP connection once you have added the provider-specific data to the access
data using the Web configurator. Your VoIP provider will supply you with this data.
> Exit the connection assistant by pressing and holding the end call key a and use the
Web configurator to enter your provider data and VoIP account data. You can then create
your Gigaset.net entry directly in the Gigaset.net directory.
You will find more information on the Web configurator and the Gigaset.net phonebook in
the user guide on the enclosed CD.
Saving VoIP access data
10 Entering VoIP account data
Connection Assist.
Authent. Name:
Connection Assist.
Authent. Password:
12
Ý OK
Ý OK
> Using the number keys, enter the
authentication name (user identifica-
tion) that you received from your VoIP
provider. This entry is case-sensitive.
> Press the display key below §OK§.
> Using the number keys, enter the
authentication password that you
received from your provider. This entry
is case-sensitive.
> Press the display key below §OK§.
> To switch between upper and lower case and digits, press the # key (several times
if necessary).
> Characters entered incorrectly can be deleted using the left display key below Ý.
The character to the left of the cursor will be deleted.
> You can navigate within the input field using the control key p (press right/left).
> Depending on your provider, you may now be prompted to enter a user name. Enter it as
described above.
If you have made all the required entries, the message "Connection data complete" will appear
briefly on the display.
You can enter five additional VoIP accounts (VoIP phone numbers) via your base station's
Web configurator at a later stage. You will find more information in the user guide on the
enclosed CD.
Making calls
15
Making calls
Precondition: You have not changed your phone's default settings.
> Enter a phone number using your handset's number keys.
Please note that you must always dial the area code for calls via VoIP, even with local calls
(depends on provider).
> Briefly press the talk key c if you want to make a call via VoIP.
Or
> Press and hold the talk key c if you want to make a call via the fixed line network.
5 L Ê ÊThe answer machine is activated if is displayed after Ans Machine.
The answer machine is deactivated if is displayed.
> Press the message key f. Select the Ans M.: list using the control key p (press down)
and press the display key below §OK§.
Message playback is started.
Service (Customer Care)
16
We offer you support that is fast and tailored to your specific needs!
Our Online Support on the Internet can be reached any time from anywhere.
http://www.siemens.com/gigasetcustomercare
It provides you with 24/7 support for all our products. It also provides a list of FAQs and answers plus user
guides and current software updates (if available for the product) for you to download.
You will also find frequently asked questions and answers in the appendix of this user guide.
Service Centre
To purchase accessories for your Gigaset, contact our Service Centre at
http://gigaset.com.au/accessories
For fast and dependable assistance with any warranty claims, contact our Service Centre at
http://gigaset.com.au/warranty or complete the enclosed warranty card and return faulty goods to:
Menlo Worldwide Australia
Discovery Cove Industrial Estate
Unit 18 / 1801 Botany Road
Banksmeadow NSW 2019
Replacement or repair services are not offered in countries where our product is not sold by authorised
dealers.
Please have your proof of purchase ready when calling.
Replacement or repair services are not offered in countries where our product is not sold by authorised
dealers.
Please address any questions about DSL access and VoIP access to the respective service provider.
Issued by
Siemens Home and Office Communucation Devices GmbH & Co. KG, Schlavenhorst 66, D-46395 Bocholt
© Siemens Home and Office Communucation Devices GmbH & Co. KG 2007
All rights reserved. Subject to availability. Right of modification reserved.
www.siemens.com/gigaset


Part Number C470IP
Description Review
Maker Gigaset
PDF Download

C470IP Datasheet PDF






Similar Datasheet

1 C470IP Providing Professional Solutions
VOIP
2 C470IP Review
Gigaset





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy