MS21266 - Grommet / Plastic / Edging

Datasheet Details

Part number	MS21266
Manufacturer	Genuine Aircraft Hardware
File Size	93.51 KB
Description	Grommet / Plastic / Edging
Datasheet	MS21266 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
MS21209C04-10L	SCREW THREAD INSERT	military-fasteners
MS21209C0410L	SCREW THREAD INSERT	military-fasteners
MS21250	BOLT	AVIAQUIP
MS21253	(MS21253 / MS21254) Clip Locking	Aircraft
MS21254	(MS21253 / MS21254) Clip Locking	Aircraft

Other Datasheets by Genuine Aircraft Hardware

Part Number	Description
MS21063	Nut / Self-locking Gang Channel
MS27039	Pan Head / Structural Screws / Phillips Drive

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

Genuine Aircraft Hardware Co. Grommet, Plastic, Edging .067 +.005 -.010 .067 +.005 -.010 MS21266 All original Text, Tables, and Drawings are Copyright 1994-2006 reproduction by permission only. 12.750" 12.620" B D A C REQUIREMENTS: 1. MATERIALS: (3) NOTES: 1. REMOVE ALL BURRS AND SHARP EDGES. 2. DIMENSIONS IN INCHES. 3. THE GOVERNMENT SHALL ACQUIRE AND STOCK EDGING GROMMETS IN 12.750-12.620 LENGTHS. (3) 4. THE INSTALLING ACTIVITY SHALL FABRICATE GROMMETS FROM THE PARTS TO BE STOCKED. 5. EDGING GROMMETS ARE TO BE USED FOR ODD SHAPE HOLES IN ADDITION TO THE CIRCULAR HOLE SIZES SPECIFIED IN ABOVE TABLE. 6. MAXIMUM ALLOWABLE END GAP AFTER EDGING GROMMET IS INSTALLED FLUSH AGAINST HOLE PERIPHERY IS .025 INCH. 7.