GS8206 Datasheet PDF (3-channel constant current LED driver)

GS8206 - 3-channel constant current LED driver

Description

The GS8206 is a 3-channel constant current LED drive with resumable data transfers and internal display patterns.

There are three open-drain constant current outputs, with a build-in PWM of grayscale.

The range of input power is from +5V to +24V, and voltage-endurance of LED port is +24V.

Features

5v-24v operating supply voltage with 7805 module inside.
Default 17mA constant current output, the minimum is 11mA.
Use e-RZ code, serial data frequency 800kHz.
8bits data transfer, 12bits build-in GAMMA correction of PWM display.
Built-in PWM technology, supports 8kHz PWM refresh rate.
With resumable data transfer function, single chip damage does not infect data transmission.
Built-in display pattern for the.

Datasheet Details

Part number	GS8206
Manufacturer	Genesis
File Size	546.16 KB
Description	3-channel constant current LED driver
Datasheet	GS8206 Datasheet

📁 Similar Datasheet

GS82032AT - 2Mb Synchronous Burst SRAM (GSI Technology)

GS820E32A - 64K x 32 / 2M Synchronous Burst SRAM (GSI Technology)

GS820E32T - 64K x 32 / 2M Synchronous Burst SRAM (GSI Technology)

GS8256418GB-200 - 288Mb DCD Sync Burst SRAM (GSI Technology)

GS8256418GB-250 - 288Mb DCD Sync Burst SRAM (GSI Technology)

GS8256418GB-333 - 288Mb DCD Sync Burst SRAM (GSI Technology)

GS8256418GB-400 - 288Mb DCD Sync Burst SRAM (GSI Technology)

GS8256418GD-200 - 288Mb DCD Sync Burst SRAM (GSI Technology)

GS8256418GD-250 - 288Mb DCD Sync Burst SRAM (GSI Technology)

GS8256418GD-333 - 288Mb DCD Sync Burst SRAM (GSI Technology)

Full PDF Text Transcription

Click to expand full text

GS8206 3 channel constant current LED driver General Descriptions The GS8206 is a 3-channel constant current LED drive with resumable data transfers and internal display patterns. There are three open-drain constant current outputs, with a build-in PWM of grayscale. The range of input power is from +5V to +24V, and voltage-endurance of LED port is +24V. There is a built-in 12bits GAMMA correction module. PWM maximum refresh frequency is 8kHz. The GS8206 use the e-RZ (extended return to zero code) as the signal transmission mode, which can control the output current channel by channel and cascade infinitely. GS8206 provides two-signal data input as redundant control, which ensures the transmission of the signal if any single chip damages.

Published: Jul 2, 2023 |