UG06B Datasheet | General Semiconductor

FEATURES 0.100 (2.54) 0.090 (2.29) DIA 1.0 (25.4) MIN. 0.125 (3.18) 0.115 (2.92) 1.0 (25.4) MIN. 0.025 (0.635) 0.023 (0.584) DIA. MECHANICAL DATA Case: Void free molded plastic body over passivated chip Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any We Ight: 0.0064 ounce, 0.181 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS UG06A UG06C UG06D UNITS Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5mm) lead length at TL=75°C Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) at TL=75°C Maximum instantaneous forward voltage at 0.6A Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time (NOTE 1) Maximum reverse recovery time (NOTE 2) VRRM VRMS VDC I(AV) IFSM VF IR trr TJ=25°C TJ=100°C TJ=25°C TJ=100°C trr Qrr CJ RΘJA RΘJL TJ, TSTG 50 35 50 100 70 100 0.6 40.0 0.95 150 105 150 200 140 200 Volts Volts Volts Amp Amps Volts µA ns ns n C p F °C/W °C TA=25°C TA=100°C 5.0 100.0 15.0 25.0 35.0 8.0 20.0 9.0 97.0 28.0 -55 to +150 Maximum recovered stored charge (NOTE 2) Typical junction capacitance (NOTE 3) Typical thermal resistance (NOTE 4) Operating junction and storage temperature range NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A,Irr=0.25A (2) trr and Qrr measured at IF=0.6A: VR=30V, di/dt=50A/µs, Irr=10% IRM for meaurement of trr (3) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts (4) Thermal resistance from junction to ambient and junction to lead at 0.375" (9.5mm) lead length P.C.B. mounted with 0.2 x 0.2” (5.0 x 5.0mm) copper pads 4/98 RATINGS AND CHARACTERISTIC CURVES UG06A THRU UG06D FIG. 1 - MAXIMUM FORWARD CURRENT DERATING CURVES FIG. 2 -...