TGL41-62 Datasheet | General Semiconductor

ATURES DO-213AB SOLDERABLE ENDS 1st BAND D2 D1= 0.105 0.095 (2.67) (2.41) 0.022 (0.56) 0.018 (0.46) 0.205 (5.2) 0.185(4.7) 1st band denotes type and positive end (cathode) 0 D2 = D1 + - 0.008 (0.20) - Plastic package has Underwriters Laboratory Flammability Classification 94V-0 - For surface mounted applications - Glass passivated junction - Excellent clamping capability - Low incremental surge resistance - Fast response time typically less than 1.0ps from 0 Volts to V(BR) - 400W peak pulse capability with a 10/1000µs waveform, repetition rate (duty cycle): 0.01% - For devices with V(BR)≥10V, ID are typically less than 1.0µA - High temperature soldering guaranteed: 250°C/10 seconds at terminals MECHANICAL DATA Case: JEDEC DO-213AB molded plastic body over passivated junction Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Blue bands denotes the cathode which is positive with respect to the anode under normal TVS operation Mounting Position: Any Weight: 0.116 gram, 0.0046 ounce Dimensions in inches and (millimeters) Available in uni-directional only MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. RATINGS SYMBOL VALUE UNITS Peak pulse power dissipation with a 10/1000µs waveform (NOTE 1, FIG. 1) Steady state power dissipation at TL=75°C (NOTE 2) Peak pulse current with a 10/1000µs waveform (NOTE 1, FIG. 3) PPPM PM(AV) IPPM Minimum 400...