5KP10 Datasheet | General Semiconductor

FEATURES - Plastic package has Underwriters Laboratory Flammability Classification 94V-0 - Glass passivated junction - 5000W peak pulse power capability with a 10/1000µs waveform, repetition rate (duty cycle): 0.05% - Excellent clamping capability - Low incremental surge resistance - Fast response time: typically less than 1.0ps from 0 Volts to V(BR) - Devices with V(BR)>10V ID are typically ID less than 1.0µA - High temperature soldering guaranteed: 265°C/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension 1.0 (25.4) MIN. 0.360 (9.1) 0.340 (8.6) 0.360 (9.1) 0.340 (8.6) 0.052 (1.32) 0.048 (1.22) DIA. 1.0 (25.4) MIN. MECHANICAL DATA Dimensions in inches and (millimeters) Available in uni-directional only Case: Molded plastic body over glass passivated junction Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: The color band denotes the cathode, which is postitive with respect to the anode under normal TVS operation Mounting Position: Any Weight: 0.07 ounce, 2.1 grams MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOL VALUE UNITS Peak pulse power dissipation with a 10/1000µs waveform (NOTE 1, FIG. 1) Peak pulse current with a 10/1000µs waveform (NOTE 1) Steady state power dissipation at TL=75°C lead lengths 0.375” (9.5mm) (NOTE 2) Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) (NOTE 3) Instantaneous forward voltage at 100A, (NOTE 3) Operating junction and storage temperature range PPPM IPPM PM(AV) Minimum 5000 SEE TABLE 1 Watts Amps Watts IFSM VF TJ, TSTG 400 3.5 -55 to +175 Amps Volts °C NOTES: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2 (2) Mounted on copper pad area of 0.8 x 0.8” (20 x 20mm) per Fig. 5 (3) Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum 1/21/99 ELECTRICAL CHARACTERISTICS at...