FR602 Datasheet | Good-Ark Semiconductor

Features Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Fast switching for high efficiency Construction utilizes void-free molded plastic technique 6.0 ampere operation at TA=75 with no thermal runaway High temperature soldering guaranteed: 250 /10 seconds, 0.375”(9.5mm) lead length, 5 lbs. (2.3kg) tension Mechanical Data Case: R-6 molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.074 ounce, 2.1 grams DIM ENSIONS DIM A B C D inches Min. 0.339 0.339 0.047 1.000 Max. 0.358 0.358 0.052 Min. 8.6 8.6 1.2 25.40 mm Max. 9.1 9.1 1.3 Note Maximum Ratings and Electrical Characteristics Symbols FR601 @25 unless otherwise specified FR603 FR604 FR605 FR606 FR607 Units Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Average forward rectified current at TA=75 Peak forward surge current 8.3m S single half sine-wave (MIL-STD-750D 4066 method) Maximum instantaneous forward voltage at IFM=6.0A, TA=25 (Note 3) Maximum DC reverse current at rated DC blocking voltage TA=25 TA=55 VRRM VRMS VDC I(AV) IFSM VF IR Trr CJ TJ, TSTG 50 35 50 100 70 100 200 140 200 400 280 400 6.0 300.0 1.3 10.0 150.0 600 420 600 800 560 800 1000 700 1000 Volts Volts Volts Amps Amps Volts A Maximum reverse recovery time (Note 1) Typical junction capacitance (Note 2) Operating and storage temperature range Notes: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0MHz and applied reverse voltage of 4.0 volts (3) Pulse test: pulse width 300u Sec, Duty cycle 1% 150 150.0 -65 to +150 500 n S F RATINGS AND CHARACTERISTIC CURVES RATINGS AND CHARACTERISTIC...