Features
High surge current capability
Plastic package has Underwriters Laboratory
Flammability classification 94V-0 utilizing
Flame retardant epoxy molding compound
Glass passivated junction in R-6 package
High current operation 6.0 ampere @ TA=75
6A05G THRU 6A10G
GLASS PASSIVATED JUNCTION RECTIFIER
Reverse Voltage - 50 to 1000 Volts
Forward Current - 6.0 Amperes
Mechanical Data
Case: Molded plastic, R-6
Terminals: Axial leads, solderable per
MIL-STD-202, method 208
Polarity: Color band denotes cathode
Mounting Position: Any
Weight: 0.074 ounce, 2.105 grams
D IM E N S IO N S
inches
mm
DIM Note
Min.
Max.
Min.
Max.
A
0.339
0.358
8.6
9.1
B
0.339
0.358
8.6
9.1
C
0.047
0.052
1.2
1.3
D 1.000 - 25.40 -
Maximum Ratings and Electrical Characteristics
* @TA=25 unless otherwise specified. Single phase, half-wave, 60Hz, resistive or inductive load.
Symbols 6A05G 6A1G 6A2G 6A4G 6A6G 6A8G 6A10G Units
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current at 75
VRRM
VRMS
VDC
I(AV)
50 100 200 400 600 800 1000 Volts
35 70 140 280 420 560 700 Volts
50 100 200 400 600 800 1000 Volts
6.0 Amps
Maximum overload surge current at 1 cycle (Note 1)
Maximum forward voltage at 6.0A DC
Maximum full load reverse current, full cycle average
at 25
IFSM
VF
IR
400.0
1.0
10
Amps
Volt
A
Maximum DC reverse current at rated DC blocking
voltage and 100
IR
500
A
Typical junction capacitance (Note 2)
Typical thermal resistance (Note 3)
Operating temperature range
CJ
R
R
JA
JL
TJ
150.0
20.0
4.0
-55 to +150
F
/W
Storage temperature range
TSTG
-55 to +175
Notes:
(1) Peak forward surge current, per 8.3 ms single half sine-wave superimposed on rated load
(2) Measured at 1.0MHz and applied reverse voltage of 4.0 volts
(3) Thermal resistance from junction to ambient and from junction to lead at 0.375 (9.5mm) lead length P.C.B. mounted with 1.1X1.1 (30X30mm) copper pads
1
