GE Data Sheet
6A Analog PicoDLynxTM: Non-Isolated DC-DC Power Modules
3Vdc –14.4Vdc input; 0.6Vdc to 5.5Vdc output; 6A Output Current
Distributed power architectures
Intermediate bus voltage applications
Servers and storage applications
Compliant to RoHS II EU “Directive 2011/65/EU”
Compatible in a Pb-free or SnPb reflow environment (Z
Compliant to IPC-9592 (September 2008), Category 2,
Wide Input voltage range (3Vdc-14.4Vdc). Ref. to Figure
41 for corresponding output range.
Output voltage programmable from 0.6Vdc to 5.5Vdc via
Tunable LoopTM to optimize dynamic output voltage
Power Good signal
Fixed switching frequency
Output overcurrent protection (non-latching)
Ability to sink and source current
Cost efficient open frame design
Small size: 12.2 mm x 12.2 mm x 7.25 mm
(0.48 in x 0.48 in x 0.29 in)
Wide operating temperature range [-40°C to 105°C
(Ruggedized: -D), 85°C(Regular)]
UL* 60950-1, 2nd Ed. Recognized, CSA† C22.2 No.
60950-1-07 Certified, and VDE‡ 0805:2001-12
(EN60950-1, 2nd Ed.) Licensed
ISO** 9001 and ISO 14001 certified manufacturing
The 6A Analog PicoDLynxTM power modules are non-isolated dc-dc converters that can deliver up to 6A of output current.
These modules operate over a wide range of input voltage (VIN = 3Vdc-14.4Vdc) and provide a precisely regulated output voltage
from 0.6Vdc to 5.5Vdc, programmable via an external resistor. Features include remote On/Off, adjustable output voltage, over
current and over temperature protection. The Tunable LoopTM feature allows the user to optimize the dynamic response of the
converter to match the load with reduced amount of output capacitance leading to savings on cost and PWB area.
* UL is a registered trademark of Underwriters Laboratories, Inc.
†CSA is a registered trademark of Canadian Standards Association.
‡VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
July 21, 2014
©2014 General Electric Company. All rights reserved.