Datasheet4U Logo Datasheet4U.com

MBM29F160BE - 16M (2M x 8/1M x 16) BIT FLASH MEMORY

Description

The MBM29F160TE/BE is a 16M-bit, 5.0 V-only Flash memory organized as 2M bytes of 8 bits each or 1M words of 16 bits each.

The MBM29F160TE/BE is offered in a 48-pin TSOP (I) package.

The device is designed to be programmed in-system with the standard system 5.0 V VCC supply.

Features

  • a sector erase architecture. The sector mode allows each sector to be erased and reprogrammed without affecting other sectors. The MBM29F160TE/BE is erased when shipped from the factory. The device features single 5.0 V power supply operation for both read and write functions. Internally generated and regulated voltages are provided for the program and erase operations. A low VCC detector automatically inhibits write operations on the loss of power. The end of program or erase is detected by Dat.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MBM29F160BE-55 16M (2M x 8/1M x 16) BIT FLASH MEMORY Fujitsu
MBM29F160BE-70 16M (2M x 8/1M x 16) BIT FLASH MEMORY Fujitsu
MBM29F160BE-90 16M (2M x 8/1M x 16) BIT FLASH MEMORY Fujitsu
MBM29F160TE-55 16M (2M x 8/1M x 16) BIT FLASH MEMORY Fujitsu
MBM29F160TE-70 16M (2M x 8/1M x 16) BIT FLASH MEMORY Fujitsu

Other Datasheets by Fujitsu Semiconductor Limited

Part Number Description
MBM29F160TE 16M (2M X 8/1M X 16) BIT
MBM29F002BC 2M (256K X 8) BIT
MBM29F002TC 2M (256K x 8) BIT FLASH MEMORY
MBM29F004BC FLASH MEMORY CMOS 4M (512K x 8) BIT
MBM29F004TC (MBM29F004BC/TC) FLASH MEMORY CMOS 4 M (512 K X 8) BIT

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com FUJITSU SEMICONDUCTOR DATA SHEET DS05-20879-2E FLASH MEMORY CMOS 16M (2M × 8/1M × 16) BIT MBM29F160TE/BE-55/-70/-90 s GENERAL DESCRIPTION The MBM29F160TE/BE is a 16M-bit, 5.0 V-only Flash memory organized as 2M bytes of 8 bits each or 1M words of 16 bits each. The MBM29F160TE/BE is offered in a 48-pin TSOP (I) package. The device is designed to be programmed in-system with the standard system 5.0 V VCC supply. 12.0 V VPP is not required for write or erase operations. The device can also be reprogrammed in standard EPROM programmers. The standard MBM29F160TE/BE offers access times of 55 ns, 70 ns and 90 ns, allowing operation of high-speed microprocessors without wait states.
Published: |