MB89637 Datasheet | Fujitsu Semiconductor Limited

DESCRIPTION The MB89630 series has been developed as a general-purpose version of the F2MC- -8L family consisting of proprietary 8-bit, single-chip microcontrollers. In addition to a pact instruction set, the microcontrollers contain a variety of peripheral functions such as dual-clock control system, five operating speed control stages, a UART, timers, a PWM timer, a serial interface, an A/D converter, an external interrupt, and a watch prescaler. - : F MC stands for FUJITSU Flexible Microcontroller. . Data Shee s FEATURES - High-speed operating capability at low voltage - Minimum execution time: 0.4 µs/3.5 V, 0.8 µs/2.7 V - F2MC-8L family CPU core Multiplication and division instructions 16-bit arithmetic operations Test and branch instructions Bit manipulation instructions, etc. Instruction set optimized for controllers - Five types of timers 8-bit PWM timer: 2 channels (Also usable as a reload timer) 8-bit pulse-width count timer (Continuous measurement capable, applicable to remote control, etc.) 16-bit timer/counter 21-bit time-base timer - UART CLK-synchronous/CLK-asynchronous data transfer capable (6, 7, and 8 bits) - Serial interface Switchable transfer direction to allows munication with various equipment. - 10-bit A/D converter Activation by an external input capable (Continued) . Data Sheet 4 U . .. MB89630 Series (Continued) - External interrupt: 4 channels Four channels are independent and capable of wake-up from low-power consumption modes (with an edge detection function). - Low-power consumption modes Stop mode (Oscillation stops to minimize the current consumption.) Sleep mode (The CPU stops to reduce the current consumption to approx. 1/3 of normal.) Subclock mode Watch mode - Bus interface function With hold and ready function s PACKAGE 64-pin Plastic SH-DIP 64-pin Plastic QFP 64-pin Plastic QFP et4U. Data Shee (DIP-64P-M01) . (FPT-64P-M06) (FPT-64P-M09) 64-pin Ceramic SH-DIP 64-pin Ceramic MDIP 64-pin Ceramic MQFP (DIP-64C-A06)...