Datasheet4U Logo Datasheet4U.com

MBM29SL800BD-10 - FLASH MEMORY 8M (1M x 8/512K x 16) BIT

Download the MBM29SL800BD-10 datasheet PDF. This datasheet also covers the MBM29SL800TD variant, as both devices belong to the same flash memory 8m (1m x 8/512k x 16) bit family and are provided as variant models within a single manufacturer datasheet.

Description

Kwords of 16 bits each.

SCSP packages.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MBM29SL800TD_FujitsuMediaDevices.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MBM29SL800BD FLASH MEMORY 8M (1M x 8/512K x 16) BIT Fujitsu Media Devices
MBM29SL800BE FLASH MEMORY 8M (1M x 8/512K x 16) BIT Fujitsu Media Devices
MBM29SL800TD (MBM29SL800TD/BD) FLASH MEMORY CMOS 8 M (1 M X 8/512 K X 16) BIT Fujitsu Media Devices
MBM29SL800TE (MBM29SL800TE/BE) FLASH MEMORY CMOS 8 M (1 M X 8/512 K X 16) BIT Fujitsu Media Devices
MBM29SL160BD 16M (2M x 8/1M x 16) BIT FLASH MEMORY Fujitsu Media Devices

Other Datasheets by Fujitsu Semiconductor Limited

Part Number Description
MBM29SL800BD-12 FLASH MEMORY 8M (1M x 8/512K x 16) BIT
MBM29SL800BE-10 FLASH MEMORY 8M (1M x 8/512K x 16) BIT
MBM29SL800BE-90 FLASH MEMORY 8M (1M x 8/512K x 16) BIT
MBM29SL800TD-10 FLASH MEMORY 8M (1M x 8/512K x 16) BIT
MBM29SL800TD-12 FLASH MEMORY 8M (1M x 8/512K x 16) BIT

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com FUJITSU SEMICONDUCTOR DATA SHEET FLASH MEMORY CMOS 8 M (1 M × 8/512 K × 16) BIT MBM29SL800TD/BD-10/12 DS05-20871-5E s DESCRIPTION The MBM29SL800TD/BD are a 8 M-bit, 1.8 V-only Flash memory organized as 1 Mbytes of 8 bits each or 512 Kwords of 16 bits each. The MBM29SL800TD/BD are offered in a 48-pin TSOP (I) , 48-ball FBGA and 48-ball SCSP packages. These devices are designed to be programmed in-system with the standard system 3.0 V VCC supply. 12.0 V VPP and 5.0 V VCC are not required for write or erase operations. The devices can also be repro- grammed in standard EPROM programmers. s PRODUCT LINE UP (Continued) Part No. Ordering Part No. VCC = +2.0 V ± 0.