Datasheet4U Logo Datasheet4U.com

MBM29F004BC-70 - FLASH MEMORY CMOS 4M (512K x 8) BIT

Download the MBM29F004BC-70 datasheet PDF. This datasheet also covers the MBM29F004BC variant, as both devices belong to the same flash memory cmos 4m (512k x 8) bit family and are provided as variant models within a single manufacturer datasheet.

Description

The MBM29F004TC/BC is a 4 M-bit, 5.0 V-Only Flash memory organized as 512 K bytes of 8 bits each.

The MBM29F004TC/BC is offered in a 32-pin TSOP (1) and 32-pin QFJ (PLCC) packages.

This device is designed to be programmed in-system with the standard system 5.0 V VCC supply.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MBM29F004BC_FujitsuMediaDevices.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MBM29F004BC FLASH MEMORY CMOS 4M (512K x 8) BIT Fujitsu Media Devices
MBM29F004TC (MBM29F004BC/TC) FLASH MEMORY CMOS 4 M (512 K X 8) BIT Fujitsu Media Devices
MBM29F002BC 2M (256K X 8) BIT Fujitsu Media Devices
MBM29F002TC 2M (256K x 8) BIT FLASH MEMORY Fujitsu Media Devices
MBM29F016A 16M (2M x 8) BIT FLASH MEMORY Fujitsu Media Devices

Other Datasheets by Fujitsu Semiconductor Limited

Part Number Description
MBM29F004BC-90 FLASH MEMORY CMOS 4M (512K x 8) BIT
MBM29F004TC-70 FLASH MEMORY CMOS 4M (512K x 8) BIT
MBM29F004TC-90 FLASH MEMORY CMOS 4M (512K x 8) BIT
MBM29F002BC-55 2M (256K x 8) BIT FLASH MEMORY
MBM29F002BC-70 2M (256K x 8) BIT FLASH MEMORY

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com FUJITSU SEMICONDUCTOR DATA SHEET DS05-20876-3E FLASH MEMORY CMOS 4 M (512 K × 8) BIT MBM29F004TC/004BC-70/-90 s DESCRIPTION The MBM29F004TC/BC is a 4 M-bit, 5.0 V-Only Flash memory organized as 512 K bytes of 8 bits each. The MBM29F004TC/BC is offered in a 32-pin TSOP (1) and 32-pin QFJ (PLCC) packages. This device is designed to be programmed in-system with the standard system 5.0 V VCC supply. A 12.0 V VPP is not required for write or erase operations. The device can also be reprogrammed in standard EPROM programmers. The standard MBM29F004TC/BC offers access times between 70 ns and 90 ns allowing operation of high-speed microprocessors without wait states.
Published: |