Datasheet4U Logo Datasheet4U.com

MB85RC128 - 128 K (16 K x 8) Bit I2C

General Description

The MB85RC128 is a FRAM (Ferroelectric Random Access Memory) Stand-Alone chip in a configuration of 16,384 words × 8 bits, using the ferroelectric process and silicon gate CMOS process technologies for forming the nonvolatile memory cells.

The MB85RC128 adopts the two-wire serial interface.

Key Features

  • Bit configuration : 16,384 words × 8 bits Operating power supply voltage : 2.7 V to 3.6 V Operating frequency : 400 kHz (Max) Two-wire serial interface : I2C-bus specification ver. 2.1 compliant, supports Standard-mode/ Fast-mode. Fully controllable by two ports: serial clock (SCL) and serial data (SDA). Operating temperature range :.
  • 40 °C to +85 °C Data retention : 10 years ( + 75 °C) Read/write endurance : 1010 times Package : Plastic / SOP, 8-.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FUJITSU SEMICONDUCTOR DATA SHEET DS05–13110–3E Memory FRAM 128 K (16 K × 8) Bit I2C MB85RC128 ■ DESCRIPTION The MB85RC128 is a FRAM (Ferroelectric Random Access Memory) Stand-Alone chip in a configuration of 16,384 words × 8 bits, using the ferroelectric process and silicon gate CMOS process technologies for forming the nonvolatile memory cells. The MB85RC128 adopts the two-wire serial interface. Unlike SRAM, the MB85RC128 is able to retain data without using a data backup battery. The read/write endurance of the nonvolatile memory cells used for the MB85RC128 has improved to be at least 1010 cycles, significantly out performing Flash memory and E2PROM in the number. The MB85RC128 does not need a polling sequence after writing to the memory such as the case of Flash memory nor E2PROM.