www.DataSheet4U.com
Freescale Semiconductor
Data Sheet
MCF5213EC
Rev. 0, 05/2005
MCF5213 Microcontroller Family
Hardware Specification
The MCF5213 is a member of the ColdFire® family of
reduced instruction set computing (RISC)
microprocessors. This hardware specification provides
an overview of the 32-bit MCF5213 microcontroller,
focusing on its highly integrated and diverse feature set.
Freescale reserves the right to change or discontinue this
product without notice. Specifications and information
herein are subject to change without notice.
This 32-bit device is based on the Version 2 ColdFire
core operating at a frequency up to 80 MHz, offering
high performance and low power consumption. On-chip
memories connected tightly to the processor core include
256 Kbytes of Flash and 32 Kbytes of static random
access memory (SRAM). On-chip modules include the
following:
• V2 ColdFire core delivering 76 MIPS
(Dhrystone 2.1) at 80 MHz running from
internal Flash with Multiply Accumulate (MAC)
Unit and hardware divider
• FlexCAN controller area network (CAN)
module
• Three universal asynchronous/synchronous
receiver/transmitters (UARTs)
Table of Contents
1 MCF5213 Family Configurations .........................2
1.1 Block Diagram ...................................................3
1.2 Features.............................................................4
1.3 Part Numbers and Packaging..........................14
1.4 Package Pinouts..............................................15
1.5 Reset Signals ..................................................20
1.6 PLL and Clock Signals ....................................20
1.7 Mode Selection................................................21
1.8 External Interrupt Signals ................................21
1.9 Queued Serial Peripheral Interface (QSPI) .....22
1.10 I2C I/O Signals.................................................22
1.11 UART Module Signals .....................................22
1.12 DMA Timer Signals..........................................23
1.15 Pulse Width Modulator Signals........................24
1.16 Debug Support Signals....................................24
1.17 EzPort Signal Descriptions ..............................26
1.18 Power and Ground Pins...................................26
2 Preliminary Electrical Characteristics................26
3 Mechanical Outline Drawings ............................42
This document contains information on a new product. Specifications and information herein
are subject to change without notice.
© Freescale Semiconductor, Inc., 2005. All rights reserved.
