MC56F8355 Datasheet | Freescale Semiconductor

description in Table 2-2, added note to Table 10-7 and clarified Section 12.3. Description of Change Rev 2.0 Rev 3.0 Rev 4.0 Rev 5.0 Please see http://.freescale./semiconductors for the most current Data Sheet revision. 56F8355 Technical Data, Rev. 5.0 2 Freescale Semiconductor Preliminary 56F8355/56F8155 General Description Note: Features in italics are NOT available in the 56F8155 device. - Up to 60 MIPS at 60MHz core frequency - DSP and MCU functionality in a unified, C-efficient architecture - 256KB Program Flash - 4KB Program RAM - 8KB Data Flash - 16KB Data RAM - 16KB Boot Flash - Up to two 6-channel PWM modules - Four 4-channel, 12-bit ADCs - Temperature Sensor - Up to two Quadrature Decoders - Flex CAN module - Two Serial munication Interfaces (SCIs) - Up to two Serial Peripheral Interface (SPIs) - Up to four general purpose Quad Timers - puter Operating Properly (COP)/Watchdog - JTAG/Enhanced On-Chip Emulation (On CE™) for unobtrusive, real-time debugging - Up to 49 GPIO lines - 128-pin LQFP Package RSTO RESET 6 3 4 6 3 4 4 4 5 4 4 PWM Outputs Current Sense Inputs or GPIOC Fault Inputs PWM Outputs Current Sense Inputs or GPIOD Fault Inputs Program Controller and Hardware Looping Unit VPP 5 JTAG/ EOn CE Port VCAP 4 OCR_DIS VDD VSS 7 5 Digital Reg VDDA 2 VSSA PWMA Analog Reg 16-Bit 56800E...