Datasheet4U Logo Datasheet4U.com

FP6773 - 1A Buck/Boost Charge Pump LED Driver

General Description

The FP6773 Buck/Boost charge pump LED driver is designed for powering high brightness white LEDs for camera flash applications.

The FP6773 automatically switches modes between step-up and step-down ensuring that LED current does not depend on the forward voltage.

Key Features

  • Output Current up to 1A.
  • Up to 94% Efficiency in Torch Mode.
  • Adjustable FLASH Mode Current.
  • Minimum External Components: No Inductors.
  • Automatic Buck/Boost Mode Switchover.
  • Wide VIN Range: 2.7V to 5.5V.
  • High Frequency Operation: 2MHz.
  • 50mV Reference for Low Loss Sensing.
  • IQ < 1μA in Shutdown.
  • PWM Dimming Control.
  • Automatic Soft Start Limits Inrush Current.
  • Over-Voltage Protection on Output.
  • Over-Current Protection.
  • Over-Temper.

📥 Download Datasheet

Datasheet Details

Part number FP6773
Manufacturer Fiti
File Size 520.40 KB
Description 1A Buck/Boost Charge Pump LED Driver
Datasheet download datasheet FP6773 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FP60U120BA FAST RECOVERY DIODE JILIN SINO
FP6101 2A Buck Switching Regulator Feeling Technology
FP6102 3A Buck Switching Regulator Feeling Technology
FP6111 2A Asynchronous Buck Regulator Feeling Technology
FP6112 3A Asynchronous Buck Regulator Feeling Technology

Other Datasheets by Fiti

Part Number Description
FP6700 Universal High Brightness LED Driver
FP6714 1-Cell and 2-Cell Boost Converter
FP6715 550KHz High Efficiency Low Ripple Synchronous Step-Up Converter
FP6716 550KHz High Efficiency Low Ripple Synchronous Step-Up Converter
FP6717 550KHz High Efficiency Low Ripple Synchronous Step-Up Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
fitipower integrated technology lnc. 1A Charge Pump LED Driver Description The FP6773 Buck/Boost charge pump LED driver is designed for powering high brightness white LEDs for camera flash applications. The FP6773 automatically switches modes between step-up and step-down ensuring that LED current does not depend on the forward voltage. The FP6773 provides two current levels for TORCH and FLASH modes. In TORCH mode, the current sense reference voltage is 50mV. The LED current can be determined by current sense resistor. In Flash mode, the current sense reference voltage can be adjusted by external resistor. The maximum LED current can be set up to 1A. The FP6773 is available in a space saving TDFN-10 3mm×3mm package.