Datasheet4U Logo Datasheet4U.com

FMA246 - HIGH GAIN X-BAND MMIC AMPLIFIER

Description

The FMA246 is a 3-stage, reactively matched pHEMT high-gain MMIC amplifier designed for use over the 8 to 14 GHz bandwidth.

The supply voltage can be varied from +3V to +6V if needed.

Features

  • 8.0.
  • 14.0 GHz Operating Bandwidth 2.5 dB Noise Figure 30 dB Small-Signal Gain 19 dm Output Power +6V Single Bias Supply Adjustable Operating Current DC De-coupled Input and Output Ports Preliminary Datasheet v3.0 LAYOUT: www. DataSheet4U. com.

📥 Download Datasheet

Datasheet preview – FMA246

Datasheet Details

Part number FMA246
Manufacturer Filtronic Compound Semiconductors
File Size 426.74 KB
Description HIGH GAIN X-BAND MMIC AMPLIFIER
Datasheet download datasheet FMA246 Datasheet
Additional preview pages of the FMA246 datasheet.

📁 Similar Datasheet

  • FMA2 - Emitter common (Rohm)
  • FMA2A - Dual Digital Transistors (Rohm)
  • FMA1 - General purpose (dual digital transistors) (Rohm)
  • FMA1-06025 - EC AXIAL FAN (Qualtek)
  • FMA1-08038 - EC AXIAL FAN (Qualtek)
  • FMA1-09225 - EC AXIAL FAN (Qualtek)
  • FMA1-12038 - EC AXIAL FAN (Qualtek)
  • FMA10A - Dual Digital Transistors (Rohm)
  • FMA1125DC - Touch Sensor Controller (Fujitsu)
  • FMA11A - Dual Digital Transistors (Rohm)
Other Datasheets by Filtronic Compound Semiconductors
  • FMA219 - X-BAND LNA MMIC
  • FMA3007 - 2-20GHZ BROADBAND MMIC AMPLIFIER
  • FMA3019QFN - HIGH LINEARITY INTEGRATED BALANCED AMPLIFIER MODULE
  • FMA500 - OC-192 MODULATOR PRE-DRIVER AMPLIFIER
  • FMA501 - OC-192 MODULATOR DRIVER AMPLIFIER

Full PDF Text Transcription

Click to expand full text
FMA246 HIGH GAIN X-BAND MMIC AMPLIFIER FEATURES: • • • • • • • 8.0 – 14.0 GHz Operating Bandwidth 2.5 dB Noise Figure 30 dB Small-Signal Gain 19 dm Output Power +6V Single Bias Supply Adjustable Operating Current DC De-coupled Input and Output Ports Preliminary Datasheet v3.0 LAYOUT: www.DataSheet4U.com GENERAL DESCRIPTION: The FMA246 is a 3-stage, reactively matched pHEMT high-gain MMIC amplifier designed for use over the 8 to 14 GHz bandwidth. The supply voltage can be varied from +3V to +6V if needed. Operating current can be adjusted using the source resistor ladders located along the bottom edge, by bonding a particular pad to ground. The amplifier is unconditionally stable over all load states (-45 to +85°C), and conditionally stable if the input port is opencircuited.
Published: |