Datasheet4U Logo Datasheet4U.com

ft2850 - Class-AB/D/G Audio Power Amplifier

General Description

The ft2850 is a 5W Dual-PumpTM Class-AB/D/G audio power amplifier with automatic level control (ALC) for portable audio applications.

It integrates Class-AB and Class-D audio power amplifiers with a Class-G charge pump regulator based upon proprietary Dual-PumpTM topology.

Key Features

  • ALC that constantly monitors and safeguards the audio output against the boosted supply voltage, preventing output clipping distortion, excessive power dissipation, or speaker over-load. Once an over-level condition is detected, the ALC lowers the voltage gain of the audio amplifier proportionally to limit the peak audio output voltage.

📥 Download Datasheet

Datasheet Details

Part number ft2850
Manufacturer Fangtek
File Size 43.82 KB
Description Class-AB/D/G Audio Power Amplifier
Datasheet download datasheet ft2850 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FT2000A Fast Silicon Rectifiers Diotec Semiconductor
FT2000AA Superfast Silicon Rectifiers Diotec
FT2000AA FAST RECOVERY RECTIFIERS EIC
FT2000AB Superfast Silicon Rectifiers Diotec
FT2000AB FAST RECOVERY RECTIFIERS EIC

Other Datasheets by Fangtek

Part Number Description
ft2811 2.4W Charge Pump Class-G Audio Amplifier
ft2820 4W Dual-Pump Class-G Audio Power Amplifier
ft2830 Class-G Audio Power Amplifier
ft2011 3W Low EMI Class-D Audio Power Amplifier
ft2145 3.2W Non-Clip Class-D Audio Power Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ft2850 5W Dual-PumpTM Class-AB/D/G Audio Power Amplifier GENERAL DESCRIPTION The ft2850 is a 5W Dual-PumpTM Class-AB/D/G audio power amplifier with automatic level control (ALC) for portable audio applications. It integrates Class-AB and Class-D audio power amplifiers with a Class-G charge pump regulator based upon proprietary Dual-PumpTM topology. It operates from 3.2V to 4.6V supply. With a supply voltage at 3.7V, it can deliver an output power of 5W with 10% THD+N, or an ALC output power of 4W with 0.6% THD+N, into a 4Ω speaker load. In ft2850, the power supply rail of the audio amplifier’s output stage is adaptively boosted and regulated by a Class-G charge pump regulator, allowing much higher audio loudness than a stand-alone one directly connected to the battery.